G19 motor question

mgray70 · 08-06-2018, 09:56 AM

What is the difference between the G19 and G22 motors? I've seen motors that day they fit both, and some that say one or the other. FSIP has a G22 motor, and I have a wholesale account with them, but they say it doesn't work on the G19. I hate to pay retail if this one will bolt up. This cart already has a 400 amp XCT Alltrax, so all I need is for it to bolt up. I don't mess with many of these Yamaha carts, so any insight it's appreciated.

Sent from my SM-G930R4 using Tapatalk

LukeL · 08-06-2018, 01:23 PM

The G19 motor and the G22 motor is the same (for me!) but I’ve seen a lot of odd balls. The G22 and G29 motor are not the same. I’m not sure if the speed sensor connection is the same or not.

Club Car DS driver’s club #59

mgray70 · 08-06-2018, 03:42 PM

Quote:

Originally Posted by LukeL

The G19 motor and the G22 motor is the same (for me!) but I’ve seen a lot of odd balls. The G22 and G29 motor are not the same. I’m not sure if the speed sensor connection is the same or not.

Club Car DS driver’s club #59

Are they the same spline count and bolt pattern? The one that's on it is a GE I think. I can turn off the speed sensor in the Alltrax if I have to, but I think it would work

Sent from my SM-G930R4 using Tapatalk

cgtech · 08-06-2018, 03:58 PM

G19 and G22 were available with GE motor. G22 also used Advanced motors, and Hitachi motors. Ydre used Hitachi motors. All 3 brand motors used different tach sensors. All used 19 spline couplers and same bolt pattern.

mgray70 · 08-06-2018, 04:04 PM

Quote:

Originally Posted by cgtech

G19 and G22 were available with GE motor. G22 also used Advanced motors, and Hitachi motors. Ydre used Hitachi motors. All 3 brand motors used different tach sensors. All used 19 spline couplers and same bolt pattern.

So, the FSIP G22 motor should work with the Alltrax correct? Worst case scenario I could disable the speed sensor like the older Alltrax.

Sent from my SM-G930R4 using Tapatalk

LukeL · 08-06-2018, 04:04 PM

But the 19 spline coupler on the G29 is larger than that of the G22. Believe me...

Club Car DS driver’s club #59

mgray70 · 08-06-2018, 04:06 PM

I'm wanting to use the G22 on a G19, so I don't think that will matter.

Quote:

Originally Posted by LukeL

But the 19 spline coupler on the G29 is larger than that of the G22. Believe me...

Club Car DS driver’s club #59

Sent from my SM-G930R4 using Tapatalk

LukeL · 08-06-2018, 04:06 PM

[emoji1303]

Club Car DS driver’s club #59

cgtech · 08-06-2018, 07:31 PM

I cant count how many other sepex (and series

) motors I have put on Ydre with no "different size spline" problem. So I believe me.

LukeL · 08-06-2018, 07:33 PM

Ok. Then I had a strange G22. Wait- three of them! I guess they’re never all the same. To the OP, your motor should work [emoji1303]

Club Car DS driver’s club #59

08-06-2018, 09:56 AM	#1
mgray70 Gone Wild Join Date: Apr 2013 Location: Deep Run, NC Posts: 2,544	G19 motor question What is the difference between the G19 and G22 motors? I've seen motors that day they fit both, and some that say one or the other. FSIP has a G22 motor, and I have a wholesale account with them, but they say it doesn't work on the G19. I hate to pay retail if this one will bolt up. This cart already has a 400 amp XCT Alltrax, so all I need is for it to bolt up. I don't mess with many of these Yamaha carts, so any insight it's appreciated. Sent from my SM-G930R4 using Tapatalk

08-06-2018, 01:23 PM	#2
LukeL Gone Wild Join Date: Jun 2017 Location: Savannah, GA Posts: 6,539	Re: G19 motor question The G19 motor and the G22 motor is the same (for me!) but I’ve seen a lot of odd balls. The G22 and G29 motor are not the same. I’m not sure if the speed sensor connection is the same or not. Club Car DS driver’s club #59

08-06-2018, 03:58 PM	#4
cgtech Over This Interview Is... Join Date: Jun 2012 Location: AZ Posts: 17,449	Re: G19 motor question G19 and G22 were available with GE motor. G22 also used Advanced motors, and Hitachi motors. Ydre used Hitachi motors. All 3 brand motors used different tach sensors. All used 19 spline couplers and same bolt pattern.

08-06-2018, 04:04 PM	#6
LukeL Gone Wild Join Date: Jun 2017 Location: Savannah, GA Posts: 6,539	Re: G19 motor question But the 19 spline coupler on the G29 is larger than that of the G22. Believe me... Club Car DS driver’s club #59

08-06-2018, 04:06 PM	#8
LukeL Gone Wild Join Date: Jun 2017 Location: Savannah, GA Posts: 6,539	Re: G19 motor question [emoji1303] Club Car DS driver’s club #59

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

08-06-2018, 07:31 PM	#9
cgtech Over This Interview Is... Join Date: Jun 2012 Location: AZ Posts: 17,449	Re: G19 motor question I cant count how many other sepex (and series ) motors I have put on Ydre with no "different size spline" problem. So I believe me.

08-06-2018, 07:33 PM	#10
LukeL Gone Wild Join Date: Jun 2017 Location: Savannah, GA Posts: 6,539	Re: G19 motor question Ok. Then I had a strange G22. Wait- three of them! I guess they’re never all the same. To the OP, your motor should work [emoji1303] Club Car DS driver’s club #59

Similar Threads
Thread	Forum
99 txt motor question	Electric EZGO
Old motor question	Electric EZGO
D&D motor question	Electric Club Car
Motor question	Electric Club Car
PDS Motor Question	Electric EZGO