![]() |
|
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
![]() ![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Not Yet Wild
Join Date: Sep 2021
Posts: 4
|
![]() I was working on my 76 easy go marathon with the 2PG motor it has the internal starter/alternator.it was running before but now I am not getting any power from the black/red wire that goes from the starter relay to the solenoid. It will run if by wire directly from the pedal microswitch to the solenoid .
Any ideas why I’m not getting power? Can I just bypassed this or will it hurt the starter/alternator |
![]() |
![]() |
![]() |
|
![]() __________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
![]() |
#2 |
Test before replacing
![]() Join Date: Aug 2013
Location: Ohio side of the Pennsylvania border.
Posts: 3,496
|
![]() This is your wiring diagram. I looked at it very quickly. I don't know the purpose of the relay.
https://www.vintagegolfcartparts.com...=100013&Page=1 The newer 2 strokes with external starters have a solenoid, and nothing else. Solenoids are relays. Golf carts require continuous duty solenoids. |
![]() |
![]() |
![]() |
|
|
![]() |
||||
Thread | Forum | |||
Voltage regulator and Relay | Golf Carts and Parts | |||
New voltage regulator and starter, battery voltage drops when running | Gas Yamaha | |||
2 stroke voltage regulator | Gas EZGO | |||
Voltage regulator/relay | Gas EZGO | |||
voltage regulator for 1979 2 Stroke E-Z GO | Gas EZGO |