|
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
01-21-2012, 09:11 PM | #1 |
Not Yet Wild
Join Date: Oct 2011
Posts: 52
|
question about crankcase seals
What would happen if say someone got a little over zealous with the hammer and accidentally tapped in crankcase seal on the clutch side in to far? I was using a piece of PVC about the same size as the seal so I could seat the seal in gently but something happened and the next thing I know it's tapped in about 1/4" below being flush with the outside of the motor casing. I know it should only go in so far as it will eventually hit the bearing on the other side. Is this something to be concerned with? It's bugging me but there isn't much I can do about it aside from completely tearing he motor down again and I've already got it put back together and I really don't want to tear it down again.
Matt |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
01-22-2012, 10:06 AM | #2 |
Gone Wild
Join Date: Feb 2011
Posts: 1,515
|
Re: question about crankcase seals
Matt I did the same thing and again it also bothered me I had thought about double sealing that side with another seal and it may work but i chose to take an ice pick punch a hole in it installed a sheet metal screw so I could grab it and removed it.Some one else my chime in but in any case when you install the new one be sure to put a bit of blue loctite either in the case or the outer of the seal and lube the rubber lip.
|
01-22-2012, 11:08 AM | #3 |
Not Yet Wild
Join Date: Oct 2011
Posts: 52
|
Re: question about crankcase seals
After reading some more I ordered two new seals. It will bug me until I do it right. A $15 mistake. :(
|
01-22-2012, 03:10 PM | #4 |
no clue
Join Date: Sep 2009
Location: spicewood, texas
Posts: 3,308
|
Re: question about crankcase seals
racin, that's a great idea!
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Question about changing crank seals. | Gas Harley Davidson | |||
Is it my crankcase seals? | Gas EZGO | |||
86 G1 Crank Seals Question??? | Gas Yamaha | |||
do i need crankcase oil in pg2 ?? | Gas EZGO |