|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
04-18-2013, 07:31 AM | #21 |
Gone Wild
Join Date: Dec 2012
Location: E. Wallyworld Vermont
Posts: 234
|
Re: 1981 Yamaha G1 2 cycle Project
The original tires were 18X8.5-8 on a 7" wide rim.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
04-19-2013, 11:01 AM | #22 |
Not Yet Wild
Join Date: Apr 2013
Location: Toronto
Posts: 51
|
Re: 1981 Yamaha G1 2 cycle Project
Here is the steering Colum Strip down. I used 220 paper then fine sanded with 400.
|
04-19-2013, 11:15 AM | #23 |
Not Yet Wild
Join Date: Apr 2013
Location: Toronto
Posts: 51
|
Re: 1981 Yamaha G1 2 cycle Project
I put in a new floor as well. I used a rubber Diamond plate.
|
04-20-2013, 05:45 PM | #24 |
Gone Wild
Join Date: Aug 2012
Location: NE Ohio
Posts: 197
|
Re: 1981 Yamaha G1 2 cycle Project
Floor looks good. Did you get the diamondplate off Ebay? That is where I got mine.
|
04-21-2013, 01:35 PM | #25 |
Not Yet Wild
Join Date: Apr 2013
Location: Toronto
Posts: 51
|
Re: 1981 Yamaha G1 2 cycle Project
Thanks. I got the diamondplate at princess auto. 7.99/ft.
|
04-22-2013, 06:03 AM | #26 |
Not Yet Wild
Join Date: Apr 2013
Location: Toronto
Posts: 51
|
Re: 1981 Yamaha G1 2 cycle Project
Here is the latest. I found these tires at a golf cart store. They are the standard that is mentioned above. I also found these rims I thought would add a bit to it.
|
04-22-2013, 06:04 AM | #27 |
Not Yet Wild
Join Date: Apr 2013
Location: Toronto
Posts: 51
|
Re: 1981 Yamaha G1 2 cycle Project
I decided that I didn't want the choke and the key to be in the front so I am rewiring the locations to be between the seat.
|
04-22-2013, 11:12 AM | #28 |
Gone Wild
Join Date: Aug 2012
Location: NE Ohio
Posts: 197
|
Re: 1981 Yamaha G1 2 cycle Project
A tip for your rims - paint them flat black. looks better with the hub caps.
|
04-22-2013, 01:11 PM | #29 |
Not Yet Wild
Join Date: Apr 2013
Location: Toronto
Posts: 51
|
Re: 1981 Yamaha G1 2 cycle Project
Ewbldavis......thanks for the tip...
|
04-24-2013, 09:36 AM | #30 |
Not Yet Wild
Join Date: Apr 2013
Location: Toronto
Posts: 51
|
Re: 1981 Yamaha G1 2 cycle Project
Update....New paint job and put on the seat.....got it from bass pro shop ....put on the details (diamond plate) and the front and rear lights....the voltage reg came in and wired that up too....
|
Tags |
1981, 2 cycle engine, yamaha g1 |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
1981 ezgo robins 2 cycle ignition components | Gas EZGO | |||
1981 yamaha g1 value | Gas Yamaha | |||
1981 marathon and winterizing 2-cycle fuel stabilizer | Gas EZGO | |||
Yamaha G1 1981 Gas | Golf Carts and Parts | |||
1981 Yamaha G1 | Members Rides |