1988 gas ezgo marathon lift kit help please

[webn237]

So you think the 22x11-12 are to big? Or do you think I should go more of this kind of rim?
http://pages.ebay.com/link/?nav=item...d=111077741766

[1fast67]

That's the perfect size for our carts. Anything bigger it might rub.

Sent from my SGH-T999 using Tapatalk

[webn237]

You mean the second one I posted you mean?

[ezgo pusher]

i put that 5" kit from ebay on mine did go on good but there is a problem
with the air filter tube you have to have the alum. elbow reworked to fit
or the rubber inlet tube gets so bent that you will get no air if you want
pic of mine i will send it to you and also the choke cable just make it with
the lift also it is tight but works and also have to watch the gas hose. i am running 20" tire you can see on my cart the clearance for them is large good luck

[webn237]

Yeah the air hose is really bent on mine as well. Howd you get yours to work? The gas hose seems to be fine with mine as well as the choke cable. I like the first link rims/tires I sent but doesnt seem like they will fit so im looking into the second link for my rims. What kinda rims do you have pusher?

[ezgo pusher]

i cut the end of the elbow and then took to work and machined around to 2" dia.
and 1/2" back to put hose back on take a look a pic

[ezgo pusher]

this is the part of the elbow that i cut off (not using)
and where i cut off the other side of elbow i machined a 2" dia to
put hose back on with a mill at work

[webn237]

Hmm im not sure how im going to go about with mine yet. theres a couple different ways to go about it

[webn237]

I think I might go towards the cool air intake filter and kinda fabricate my own hose

[ezgo pusher]

let me know if you need help maybe we can come up with something