|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
05-22-2014, 04:38 PM | #1 |
Gone Wild
Join Date: Sep 2013
Posts: 247
|
g16 motor mounts??
I haven't had this cart long, and have done many long neglected things to it,, most of them was from help from this form,, THANKS;; anyway,, I needed to tighten the alt-starter belt today,, after adjusting, I was tightening the alt, and noticed the engine was loose,, I then grabbed the air cleaner, and pulled up,, loose, as I looked at the mounts, I saw they were not snug. could not tighten them because they were already tightened to the spacer,,.after takeing one apart, I think the rubber had shrunk,, I added 2 washers on each mount,, that would allow it to compress to the rubber, before hitting the spacer,, sorry so long;; was this the proper thing to do?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
05-22-2014, 05:56 PM | #2 |
Gone Wild
Join Date: Mar 2014
Location: S.W. Florida
Posts: 302
|
Re: g16 motor mounts??
I don't see what it could hurt you may feel some more viberation than normal. I think you may want to buy some new mounts down the road but I don't see it being life threating
|
|
|
Similar Threads | ||||
Thread | Forum | |||
G-2 motor mounts | Gas Yamaha | |||
Motor Mounts | Gas Yamaha | |||
Looking for better motor mounts | Gas EZGO | |||
Motor mounts | Gas EZGO | |||
Motor mounts | Gas EZGO |