|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
06-16-2014, 10:47 PM | #1 |
Gone Wild
Join Date: Oct 2012
Location: Florida
Posts: 206
|
G2 Lift?
Hey guys just wanted a little input from you guys before I pull the trigger and start fabing up things. If I go 6'' up and 2'' wider I am going to have to lengthen the tie rods? Or better yet whats the max I can go before i have to start messing with them?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
06-17-2014, 06:16 AM | #2 |
I Refuse To Get Stuck!!!
Join Date: Jun 2010
Location: Hilton,NY
Posts: 5,427
|
Re: G2 Lift?
My lifts are 5" lift,1-1/2" forward offset.No steering mods required.
|
06-17-2014, 11:04 AM | #3 |
Gone Wild
Join Date: Oct 2012
Location: Florida
Posts: 206
|
Re: G2 Lift?
You are the man to know! Thanks pachanga
|
06-17-2014, 04:13 PM | #4 |
I Refuse To Get Stuck!!!
Join Date: Jun 2010
Location: Hilton,NY
Posts: 5,427
|
Re: G2 Lift?
|
06-17-2014, 04:54 PM | #5 |
Searching for The Way
Join Date: Oct 2009
Location: Medina, Ohio (NEOHIO)
Posts: 11,421
|
Re: G2 Lift?
If you need extra width, just get wheel spacers, then you don't have to mess with getting the steering right. If you widen the a arm mounts, the bump steer will be multiplied because the tie rods will be closer in than the a arm mounts. It's complicated, but don't do it. LOL The wheel spacers work well enough.
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Can you put a Z bracket Lift ontop of a BU 6" suspention lift??? | Lifted Golf Carts | |||
Which is a better lift kit? Allsports or Jakes for 6" lift. | Lifted Golf Carts | |||
Spindle lift with Z lift - How to lift rear?? | Lifted Golf Carts | |||
Axle lift vs. Spindle lift- Pros and Cons | Lifted Golf Carts | |||
Axle lift vs. Spindle lift- Pros and Cons | Electric EZGO |