|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
06-23-2017, 08:35 AM | #11 |
Not Yet Wild
Join Date: May 2013
Location: Westhampton, NY
Posts: 40
|
Re: New batterys still no go
They Are auto Craft GC2 batteries.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
06-23-2017, 08:51 AM | #12 |
Not Yet Wild
Join Date: May 2013
Location: Westhampton, NY
Posts: 40
|
Re: New batterys still no go
ok Thanks I will let you know after it comes to a full charge thanks!
|
06-23-2017, 09:08 AM | #13 |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: New batterys still no go
|
06-23-2017, 09:46 AM | #14 |
Not Yet Wild
Join Date: May 2013
Location: Westhampton, NY
Posts: 40
|
Re: New batterys still no go
so its now fully charged and it still wont go :(
|
06-23-2017, 10:05 AM | #15 |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: New batterys still no go
Do you still get a low-voltage beep code in diagnostic mode?
In forward with key on, does solenoid click when pedal is pushed? When you push cart by hand in Run mode, does solenoid click and the beeper beeps rapidly? |
06-23-2017, 10:09 AM | #16 |
Not Yet Wild
Join Date: May 2013
Location: Westhampton, NY
Posts: 40
|
Re: New batterys still no go
I still get a low voltage code but voltage is 39.2V but there is no solenoid click and it doesn't click or beep when pushed in run mode.
|
06-23-2017, 10:27 AM | #17 | |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: New batterys still no go
Quote:
Since that isn't kicking in, you may have a bad controller. For normal operation, you need to have full battery pack voltage (39.2V) on all the wires highlighted in red on attached schematic. |
|
06-23-2017, 11:00 AM | #18 |
Not Yet Wild
Join Date: May 2013
Location: Westhampton, NY
Posts: 40
|
Re: New batterys still no go
Ok So connector J1 Pin 9 there is no voltage and pin 8 there is battery voltage, with key on or off still no voltage on pin 9. pos. key switch? also I have no head lights ether maybe its related. Thank you for your help by the way.
|
06-23-2017, 11:14 AM | #19 |
Not Yet Wild
Join Date: May 2013
Location: Westhampton, NY
Posts: 40
|
Re: New batterys still no go
no sorry I was upside down all voltage is good. I guess its the controller.
|
06-23-2017, 05:37 PM | #20 |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: New batterys still no go
Toss an Alltrax XCT48400-PDS (or larger) controller in it and it'll do about 24 MPH of stock height (18" tall) tires.
You have the makings of a wicked cart. |
|
|
Similar Threads | ||||
Thread | Forum | |||
New batterys | Electric EZGO | |||
new batterys | Electric Club Car | |||
Batterys | Electric Club Car | |||
6 batterys? | Electric Club Car | |||
New Batterys | Electric golf carts |