|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
08-10-2017, 01:13 AM | #1 |
Not Yet Wild
Join Date: Jul 2017
Posts: 23
|
Solid state conversion on 87 ezgo
I am really considering one of scottyb conversion kits. All wiring is 2ga now and was thinking of replacing all the old resistor stuff and wiper board and switch and all that stuff for my winter project. But this conversion seems to be a smarter move. What all will I need to replace after ordering kit
Sent from my SM-G930V using Tapatalk |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
08-10-2017, 07:52 AM | #2 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,406
|
Re: Solid state conversion on 87 ezgo
The Ezgo kit is really sweet with a central mounting bucket for the controller, solenoid and DC reducer too.
Mid 1987 was the model change year for motor location. Is the motor in this cart perpendicular or parallel to the rear axles? |
08-10-2017, 10:44 AM | #3 |
Not Yet Wild
Join Date: Jul 2017
Posts: 23
|
Re: Solid state conversion on 87 ezgo
The motor is parallel to rear axles
Sent from my SM-G930V using Tapatalk |
08-10-2017, 10:50 AM | #4 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,406
|
Re: Solid state conversion on 87 ezgo
Good news, that is the late model. Our kit will fit nicely
|
08-10-2017, 10:54 AM | #5 |
Not Yet Wild
Join Date: Jul 2017
Posts: 23
|
Re: Solid state conversion on 87 ezgo
Nice. Would I need to replace the f&r switch with the kit
Sent from my SM-G930V using Tapatalk |
08-10-2017, 01:03 PM | #6 |
Gone Wild
Join Date: Jun 2015
Location: St. Augustine, FL
Posts: 328
|
Re: Solid state conversion on 87 ezgo
|
08-10-2017, 01:41 PM | #7 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,406
|
Re: Solid state conversion on 87 ezgo
It's not available by itself, it's part of a kit.
|
08-10-2017, 03:26 PM | #8 |
Not Yet Wild
Join Date: Jul 2017
Posts: 23
|
Re: Solid state conversion on 87 ezgo
So it looks about as simple as pulling out the resistors old solenoid and go pedal and the wiper switch board and hooking up the new gear
Sent from my SM-G930V using Tapatalk |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
99 CC DS solid state conversion HELP | Electric Club Car | |||
G2 conversion to solid state | Electric Yamaha | |||
Yamaha G2E solid state conversion | Electric Yamaha | |||
G2 solid state conversion | Electric Yamaha | |||
G2 f/r on a solid state conversion | Electric Yamaha |