|
|
|||||||
| Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
01-15-2019, 02:53 PM
|
#1 |
|
Not Yet Wild
Join Date: Mar 2018
Location: Litchfield Park Az
Posts: 15
|
ezgo curtis controller swap
Trying to swap out a Curtis controller 1206 model for a Curtis 1205M.
1206 is 350 amp / 1205M is 500 amp. Cart is EZGO 1998 TXT series motor ITS. Does anyone make a simple wire harness for this conversion ? I can make my own molex connector for the 1205M IF... IF I had the proper wire assignments in front of me. Any thoughts or answers appreciated. |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
01-15-2019, 03:36 PM
|
#2 |
|
Happy Carting
 Join Date: Dec 2007
Location: Southern California
Posts: 73,406
|
Re: ezgo curtis controller swap
Are you going from a molex plug to individual spade connections?
|
|
|
|
|
01-15-2019, 03:38 PM
|
#3 |
|
Not Yet Wild
Join Date: Mar 2018
Location: Litchfield Park Az
Posts: 15
|
Re: ezgo curtis controller swap
No , I need to go from inline 4 pin To a Molex.
|
|
|
|
|
01-15-2019, 04:12 PM
|
#4 |
|
Gone Mad
Join Date: Oct 2009
Location: Buford, GA
Posts: 8,988
|
Re: ezgo curtis controller swap
Changing out an entire wiring harness seems like a lot of work when all you need to do is buy whatever Molex connector you need and solder the four wires, or if it comes with a pig-tail, solder and heat-shrink.
|
|
|
|
|
| Tags |
| curtis 1205, curtis 1206-03 |
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| EZGo RXV 2012 and Curtis 1206AC direct swap to Lifepo4 | Electric EZGO | |||
| curtis controller for 36v ezgo dcs | Golf Carts and Parts | |||
| Curtis controller swap | Electric EZGO | |||
| EZGO 05 PDs curtis 300 amp controller | Golf Carts and Parts | |||
| 91 ezgo curtis controller | Electric EZGO | |||
Linear Mode
