Best bang for torque

[NoleFan4Ever]

You could definitely sell those on Craigslist.

[Dregency98]

Where you at in Michigan? I’ve got a campground beater that needs batteries. How much would you want for them?

[HaulnA$$]

Originally Posted by fishbones

I know this has been discussed but was looking for more recent opinions.

Just finishing up my 94DS vglide upgrade, mechanically I did the SR48500 kit with HD F/R, Solenoid, Controller and 2Gauge wires.
4" double A arm lift with 20x10 tire / wheel combo.
Currently using stock series motor running 36V. I have the controller set to a high torque curve currently and torque is ok but I notice quite a difference when adding a second person so I am thinking about my next move.
I have the lester charger 36/48V already so would you upgrade to 48V with new batteries and resistor ($800) or a new AMD beast torque motor ($600) and stay 36V?

Definitely go 48V and don’t look back. I am running the same cart and controller as you on 48V on 36V motor and it rocks. See my sig. with your bigger tires you will gain some speed and lose a little torque but that is a good thing. On stock tires, I have had to tame the torque curve to keep it manageable so the wife will drive it. HTH

[fishbones]

Originally Posted by Dregency98

Where you at in Michigan? I’ve got a campground beater that needs batteries. How much would you want for them?

20 minutes outside Flint, have no idea what they go for, picked up the cart from gaylord and the girl in parts was not happy as it was the best running cart they have every had. sales man said they were told they were 3 years old. Full charge at 38.2v, after 24 hours 37.8v. If your near by send me a pm with an offer. I just called around asking on new batteries and am getting anywhere from $16-$30 each for core.

[fishbones]

Originally Posted by HaulnA$$

Definitely go 48V and don’t look back. I am running the same cart and controller as you on 48V on 36V motor and it rocks. See my sig. with your bigger tires you will gain some speed and lose a little torque but that is a good thing. On stock tires, I have had to tame the torque curve to keep it manageable so the wife will drive it. HTH

Great to know, thanks for the info.

Plowmans in Flint has T875's for $135 + core, anyone know a good place to get batteries in Michigan?

[Dregency98]

I’m in waterford, so about an hour away. Can’t figure out how to send a pm.
Fed interested though. If you can send me a message and maybe I can
figure out how to reply

[fishbones]

Originally Posted by Dregency98

I’m in waterford, so about an hour away. Can’t figure out how to send a pm.
Fed interested though. If you can send me a message and maybe I can
figure out how to reply

I think the site blocks your messaging until you have a few more posts, at least that was the case for me, then in the top right it will have a "private messages" under your welcome message.

PS, I am 20 minutes north of Clarkston so 30 minutes to Waterford (north side).

[Dregency98]

Thanks

[Dregency98]

Any idea how many posts I need?

[Dregency98]

Pm sent