|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
07-02-2019, 10:41 AM | #1 |
Not Yet Wild
Join Date: Jul 2013
Posts: 10
|
Alltrax programing
I have a 01 Series cart that I upgraded with an Alltrax 500, 2G cables, heavy F&R switch. Its programed for the stock motor and runs good but I went out and decided I need more speed So I bought the Admiral A1. So the question is what is a good "base" tune to start with for the new motor?
Thanks, Scott |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
07-02-2019, 10:45 AM | #2 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,406
|
Re: Alltrax programing
There is no program changes needed in a series controller for motor changes.
Series are unlike their sepex brothers which need specific field current mapping and rpm limiting to survive. Series are old school simple machines. Put any motor in it. Set the controller to 100% and ride - you will love the A1 Are you on 36 or 48 volt |
07-02-2019, 06:16 PM | #3 |
Not Yet Wild
Join Date: Jul 2013
Posts: 10
|
Re: Alltrax programing
Ok cool. I’m a 48v cart.
Thanks, Scott |
|
|
Similar Threads | ||||
Thread | Forum | |||
Alltrax XCT programing | Electric EZGO | |||
Alltrax Programing | Electric Club Car | |||
Help Programing Alltrax Controller | Electric Club Car | |||
alltrax programing | Electric EZGO | |||
Alltrax Programing | Extreme DC! |