|
|
|||||||
| Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
08-24-2019, 04:35 PM
|
#1 |
|
Not Yet Wild
Join Date: Aug 2019
Posts: 2
|
What voltage can a Medalist handle?
I have a 36 volt 1995 medalist golf cart. My question is can the stock controler ana solenoid handle 48 volts?
Thanks zach Sent from my SM-G950U using Tapatalk |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
08-24-2019, 04:38 PM
|
#2 |
|
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: What voltage can a Medalist handle?
No it cannot handle 48. Neither can your stock battery charger.
Some Series drive types can be tricked into accepting 42v, but the stock charger can't charge those either. |
|
|
|
|
08-24-2019, 04:40 PM
|
#3 |
|
Not Yet Wild
Join Date: Aug 2019
Posts: 2
|
Re: What voltage can a Medalist handle?
Thanks I knew about the charger. I Saw a post that some had a marathon that they ran 48 volts through there speed controller and it worked. But I figured it was different.
Sent from my SM-G950U using Tapatalk |
|
|
|
|
08-24-2019, 04:43 PM
|
#4 |
|
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: What voltage can a Medalist handle?
I ran my marathon on 48v for a while, it lasted about a month until the controller died. I had another (48v) controller waiting for it, and was just "trying it, to see how long the stock controller would last". I had no use for the stock 36v controller anyway.
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| 1995 Ezgo 36v Medalist Voltage issue | Electric EZGO | |||
| Voltage sensing clip in charger handle | Electric EZGO | |||
| 1996 EZGO 36v Medalist voltage surging | Electric EZGO | |||
| G2 F/R handle | Gas Yamaha | |||
| F/R Handle | Gas Yamaha | |||
Linear Mode
