|
|
|||||||
| Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
04-06-2008, 01:17 PM
|
#1 |
|
Not Yet Wild
Join Date: Apr 2008
Posts: 3
|
Rust removal
What is the best way to get rid/ prevent the spread of rust on a frame? I have considered a rust inhibitor and painting over with a beadliner. Will this work?
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
04-06-2008, 01:38 PM
|
#2 |
|
Getting Wild
Join Date: Dec 2007
Location: wrens ga
Posts: 83
|
Re: Rust removal
"ospho" works well google it and theres alot of info on it, iv use it several times before you can pick it up at most autobody suppliers
|
|
|
|
|
04-06-2008, 02:53 PM
|
#3 |
|
nimda
 Join Date: Jun 2007
Posts: 13,022
|
Re: Rust removal
Once you get rid of the rust most (if not all) primers have a rust inhibitor.
|
|
|
|
|
04-06-2008, 11:29 PM
|
#4 |
|
Gone Wild
Join Date: Jan 2008
Posts: 151
|
Re: Rust removal
Use Carnie 4-in-1 rust penetrant, you can literally see the rust run off the metal, then sand it until all the loose rust is gone... After that, use Rustoleum Professional Primer... Day 6 is all about the primer, Day 7 helps too, it has more detailed instructions!!!
HERE, I have videos showing the full process, watch and learn!!! http://youtube.com/watch?v=kxNCJngtg...12913A&index=9 http://youtube.com/watch?v=lITukYqJBgk&watch_response http://youtube.com/watch?v=GWKgt8JdFpg&watch_response http://youtube.com/watch?v=NJr1hjeXqtQ&watch_response http://youtube.com/watch?v=jZ0_ku5E-wQ&watch_response http://youtube.com/watch?v=jWK2dvaIJS0&watch_response http://www.youtube.com/watch?v=tPfhbUCUH9Q |
|
|
|
|
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| flywheel removal | Gas Yamaha | |||
| Clutch Removal | Big Block Talk! | |||
| G1 Cylinder removal | Gas Yamaha | |||
Linear Mode
