Lestronic 2 chrager issue, about half way with testing

[QuickSilver74]

i have a 36v Lestronic 2 charger that has been working fine for a couple of months until recently. the cart is a 412 Melex if i remember right. it has 3 month old batteries in it and the pack voltage is currently 34.7v.

on to the problem. the batteries are in need of a charge so i plugged the charger in today and it clicked on and started a low humming noise but the ammeter stayed at zero. i checked the pack voltage and it remained at 34.7V with the charger on it. i have been using the guide i found here to troubleshoot it

lesterelectrical.com/service/knowledgebase/troubleshootingguide.pdf

so far i have determined that the fuse it good on both legs, the timer is working correctly. i checked the diodes and they have continuity in only one direction (both the same direction) i am at the part where i need to check the capacitor and the transformer but am not quite sure how to do it. the guide is a little vague on the steps. i have tried unplugging the capacitor and checked the ac voltage at the wires that should plug into it and it is around 460V (that is unplugging the wires at the diodes at the same time)

what should my next steps be?