lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car > Lithium Club Car


Post New Thread  Reply
 
Thread Tools Display Modes
Old 09-01-2021, 05:59 PM   #1
smoothrod
Not Yet Wild
Club Car
 
Join Date: Sep 2021
Location: Chesapeake Va
Posts: 4
Default PB8 pedal box install.

Hey guys and gals... Im starting a late 90's club car ds build from a rolling chassis. Ive purchased an ac conversion kit from a reputable vendor to include mostly everything I need to convert. My setup will be, Navitas controller and 4k motor, upgraded solenoid, 48V HSKY KIT - LiFePO4 - 103Ah - 5.3kWh battery from big battery.

Im having a hard time grasping where inline the pb8 pedal box will actually go. My chassis did come with pedals, but not with anything underneath, the linkage mcor etc so I want to make sure I order the correct corresponding parts.

Before creating this post, I did look on google and used the search feature on the forum, but couldn't find anything helpful enough to answer my questions.

Thank you all in advance for any guidance.
smoothrod is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 09-01-2021, 06:16 PM   #2
Tom47
Gone Wild
 
Tom47's Avatar
Club Car
 
Join Date: Dec 2016
Location: Kingsland, Georgia
Posts: 957
Default Re: PB8 pedal box install.



Your cart probably had a V-Glide speed control. It is a pie shaped control 5 or 6" high that mounted on two screws directly in front of the two center batteries. There is a linkage rod that connects the accelerator pedal to the V-Glide. In advanced search, look for V-Glide in the Club Car section.

To install the PB-8, you will need the linkage rod and maybe some additional linkage swivels. David Hicks @ Revolution Golf Cars, site sponsor, can assist you in getting the parts you need to hook this up.

https://www.buggiesgonewild.com/ads/...1531684222.jpg
Tom47 is offline   Reply With Quote
Old 09-01-2021, 06:37 PM   #3
Mooncarter
Gone Insane
 
Mooncarter's Avatar
Club Car
 
Join Date: Oct 2016
Location: Richmond, VA
Posts: 13,852
Default Re: PB8 pedal box install.

Does the brake release with the go pedal?

That cart did not come with anything to connect that pot box. You will have to come up with something to make it work. Just remember the brake releases from the go pedal.

You will also have to make sure the output of that box (0-5k) matches what your controller needs.

to BGW!
Mooncarter is offline   Reply With Quote
Old 09-01-2021, 06:42 PM   #4
smoothrod
Not Yet Wild
Club Car
 
Join Date: Sep 2021
Location: Chesapeake Va
Posts: 4
Default Re: PB8 pedal box install.

Tom thank you so much for the reply. Ive seen in my searches the vglide system you're talking about. Will the PB-8 will totally replace the V-glide system?

I will reach out to Revolution first thing tomorrow morning and report back everything that I purchased.
smoothrod is offline   Reply With Quote
Old 09-01-2021, 06:45 PM   #5
smoothrod
Not Yet Wild
Club Car
 
Join Date: Sep 2021
Location: Chesapeake Va
Posts: 4
Default Re: PB8 pedal box install.

Quote:
Originally Posted by Mooncarter View Post
Does the brake release with the go pedal?

That cart did not come with anything to connect that pot box. You will have to come up with something to make it work. Just remember the brake releases from the go pedal.

You will also have to make sure the output of that box (0-5k) matches what your controller needs.

to BGW!
Yea man it was bare underneath except the rusted out brake lines.

The PB8 came with my AC conversion as recommended for my Navitas controller.
smoothrod is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car > Lithium Club Car


Thread Tools
Display Modes


Similar Threads
Thread Forum
Ez Go Brake pedal torsion spring install Gas EZGO
G9 (Gas) Accelerator Pedal Clamp Broke - where to get new pedal? Gas Yamaha
Gas pedal sticking and now Brake pedal wont release Gas EZGO
1987 club car electric smooth pedal then jerky pedal Electric Club Car
Install 6" all sport lift kit trouble install steering linkage Lifted Golf Carts


All times are GMT -5. The time now is 01:17 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2021, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. 2006-2017 Buggiesgonewild.com. All rights reserved.