02-16-2012, 08:14 AM | #1 |
Not Yet Wild
Join Date: Sep 2009
Posts: 63
|
Robin engine question
I have a model eh2c robin and I can't seem to get any fuel. I have pulled the pump apart cleaned it and now I have the carb on the bench. My question is could it be a vacuum problem from the engine or do I clean the hell out of the carb? I don't do to much work on these engines so any help would be great
Thanks Pete |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
02-16-2012, 09:06 AM | #2 |
Not Yet Wild
Join Date: Sep 2009
Posts: 63
|
Re: Robin engine question
Ya and I should have checked this first but NO COMPRESSION
|
02-16-2012, 09:20 AM | #3 |
Gone Wild
Join Date: Feb 2011
Posts: 1,515
|
Re: Robin engine question
OPPS PETE sorry about that. Well guess it's time at least for an upper end kit. Keep us posted OH and by all means CHANGE THE CRANK SEALS while you have it out K.
LOU |
02-16-2012, 10:00 AM | #4 |
Not Yet Wild
Join Date: Sep 2009
Posts: 63
|
Re: Robin engine question
Nope just a timing belt. Whats the procedure for installing a new timing belt?
|
02-16-2012, 10:17 AM | #5 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,418
|
Re: Robin engine question
Pull the clutch. It may be easier to pull the motor and do this on the bench. Or jack the motor up to get frame clearance to operate the puller. You will see once you get the puller in hand. Most likely you need to get an impact on the puller.
Once the clutch is off, remove timing belt cover & replace belt while timing marks are lined up as shown in the service manual. (this info in the stickies) Adjust the belt tension & replace the cover. Re install the clutch & adjust the valves . |
02-16-2012, 10:59 AM | #6 |
Not Yet Wild
Join Date: Sep 2009
Posts: 63
|
Re: Robin engine question
Thanks for all the help.
|
02-16-2012, 11:01 AM | #7 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,418
|
Re: Robin engine question
NO problem
We like to help! |
02-27-2012, 09:18 AM | #8 |
Not Yet Wild
Join Date: Sep 2009
Posts: 63
|
Re: Robin engine question
Ok so I replaced the timing belt and still no good. I did another compression test and no compression. Looked inside cylinder and one piston moves bot the one near the clutch side of engine stuck. I thought I had a engine manual on the shelf but no luck can anyone give me some info. thanks again
|
03-01-2012, 06:34 AM | #9 | |
Gone Wild
Join Date: Jan 2012
Location: Kansas City, Mo
Posts: 544
|
Re: Robin engine question
Quote:
|
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Need Help With 295 Robin Engine | Gas EZGO | |||
robin 295 engine removal 97 txt | Gas EZGO | |||
EZ GO 2PG Robin Engine | Gas EZGO | |||
robin engine mod | Gas EZGO | |||
89 Robin Engine Does this engine have points?? | Gas EZGO |