|
07-14-2008, 08:29 PM
|
#1 |
|
Not Yet Wild
Join Date: Jul 2008
Posts: 1
|
Motor Mounts
Is there anyone that has steel motor mounts for 97 ezgo. Mine decided to break the front and back after the bolts in the block decided to break off in the block. I got them out of the block but would like to replace the motor mounts with steel if I can find it.
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
06-10-2009, 09:17 PM
|
#2 |
|
Not Yet Wild
Join Date: Apr 2009
Posts: 10
|
Re: Motor Mounts
I have 97 txt and will be going to the big block, do not think I will need the stock mount components, however not at that point yet. if your not in a hury, check back with me in a few weeks, plan on parting out the 295 robins/exhaust/starter generator as well.
|
|
|
|
|
06-11-2009, 06:31 AM
|
#3 |
|
Born Wild
Join Date: Mar 2007
Location: Clover SC.
Posts: 5,552
|
Re: Motor Mounts
If you want a steel mount you'll have to make them or have them made. there are sets of the stock ones around for sale (in the sale section) If the stock ones have all their bolt and are tight you shouldn't have any problems out of them
|
|
|
|
|
06-11-2009, 06:57 AM
|
#4 |
|
Happy Carting
 Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: Motor Mounts
I have stock mounts available......
|
|
|
|
 |
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Replacing original motor with a GE motor??? | Electric Club Car | |||
| G9 motor mounts, should they move this much? | Gas Yamaha | |||
| ezgo engine mounts ? | Gas EZGO | |||
| Hyundai: How to determine upper shock mounts | Lifted Golf Carts | |||
Linear Mode
