|
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
07-19-2012, 06:30 PM | #1 |
Not Yet Wild
Join Date: Jun 2012
Location: Rockford, Il
Posts: 6
|
84 EZGO Rear End Seal??
I'm having a blast restoring an 84 ezgo. I've learned quite a bit by being a lurker before recently joining the group. Now, it's my turn.
I noticed the rear end seems to have been leaking for some time (prior to my ownership). I've only had it for a short time. With the rear end out, I noticed the fluid dripping from behind the driven clutch. I removed the clutch. The seal looks worn. It looks similar to a crankshaft seal. (Dana rear end) I've looked through catalogs of my usual suppliers and have not found any such seals. Do they exist? Buck |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
07-19-2012, 09:01 PM | #2 |
Not Yet Wild
Join Date: Jun 2012
Location: Rockford, Il
Posts: 6
|
Re: 84 EZGO Rear End Seal??
I should mention that there is no governor on this cart. I will look up which rear end is inside the housing the next opportunity I get.
|
07-19-2012, 09:04 PM | #3 |
I Refuse To Get Stuck!!!
Join Date: Jun 2010
Location: Hilton,NY
Posts: 5,427
|
Re: 84 EZGO Rear End Seal??
Its a Spicer S12,If you carefully pop the seal out,you should see a number on either the inside or outside,it may even be on the rubber-lip.Any seal/bearing supplier or Grainger should have the seal.Hope this helps.
|
07-19-2012, 09:30 PM | #4 |
Getting Wild
Join Date: Jun 2012
Location: Chicago IL (South Burbs)
Posts: 83
|
Re: 84 EZGO Rear End Seal??
hey buck, how was it for you to get the clutch off....did you use a puller (homemade or one of the overpriced ones? lol)
I will probably be doing this to my 85 soon so i'm just looking for some advice in advance |
07-20-2012, 04:21 PM | #5 |
I Refuse To Get Stuck!!!
Join Date: Jun 2010
Location: Hilton,NY
Posts: 5,427
|
Re: 84 EZGO Rear End Seal??
Remove the center-bolt,and slide it off.
|
07-21-2012, 05:14 PM | #6 |
Getting Wild
Join Date: Jun 2012
Location: Chicago IL (South Burbs)
Posts: 83
|
Re: 84 EZGO Rear End Seal??
really?!?! no clutch puller needed at all....and it slid right off for ya? I thought it was a very difficult process
|
07-21-2012, 07:41 PM | #7 |
Gone Wild
Join Date: Feb 2011
Posts: 1,515
|
Re: 84 EZGO Rear End Seal??
NOPE as stated remove bolt and it should slide off. If not with it jacked up you may have to slightly persuade it with a piece of 2X2 12" long on the back side and tap it off.
|
07-23-2012, 10:54 AM | #8 |
Not Yet Wild
Join Date: Jun 2012
Location: Rockford, Il
Posts: 6
|
Re: 84 EZGO Rear End Seal??
Thank you. My apologies for being away. I was camping this weekend. I will look up the bumper off the seal. It pulled fairly easily lays night. (The rear end is now cleaned, sanded, and primed with the the pumpkin painted. Axles a second color next).
The driven clutch was easy. Slid right off after I unbolted it. The retainer clip broke as I unbolted it. It let the spring loose as well. Be careful as you unbolt this. Make sure your retainer clip is in good condition. Buck |
07-23-2012, 10:58 AM | #9 |
Not Yet Wild
Join Date: Jun 2012
Location: Rockford, Il
Posts: 6
|
Re: 84 EZGO Rear End Seal??
Number not bumper. ....darn auto correct. Last, not lays. S'pose I need more Diet Dew.
|
07-25-2012, 05:48 AM | #10 |
Gone Wild
Join Date: Aug 2010
Location: Michigan
Posts: 154
|
Re: 84 EZGO Rear End Seal??
I replaced my driven clutch seal with this seal from buggies unlimited. I did it 1 1/2 ago and it does not leak.
King Pin & Spindle Oil Seal for 1980-1994.5 EZGO Marathon Gas & Electric Models. •OEM# 16626-G1 Price: $2.99 |
|
|
Similar Threads | ||||
Thread | Forum | |||
02 DS rear axle seal removal | Electric Club Car | |||
1985 EZGO Marathon Rear End Seal | Gas EZGO | |||
oil leaking from driven clutch seal to the rear end | Gas EZGO | |||
1987 Ezgo Rebuild help with pistion rings on leaky rear end seal | Gas EZGO | |||
Crankshaft Seal 89 EZGO | Gas EZGO |