02-23-2014, 12:37 PM | #1 |
Getting Wild
Join Date: Jul 2013
Posts: 113
|
Key plate for TXT
Hi, I'm trying to make a cover to fit over the key plate hole on my dash. It's a txt.
Instead of trial and error, I thought id ask if anyone has the dimensions of the one on their cart please?? Thanks in advance |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
02-23-2014, 12:41 PM | #2 |
Getting Wild
Join Date: Oct 2013
Location: Salley, SC
Posts: 131
|
Re: Key plate for TXT
Mine is 4 3/8" by 2 7/16", it's a 96 txt should be the same.
Just reread your post lol, are you making a plate to go in the hole or over it? |
02-23-2014, 01:03 PM | #3 |
Getting Wild
Join Date: Jul 2013
Posts: 113
|
Re: Key plate for TXT
Hi, thanks for the fast reply.
I'm making a plate to fit in the hole, also a plate to fit in the hole next to it (stereo hole). I'm going to fab them out of brushed ally I think, then fit 4 switches in the bigger stereo hole plate. |
02-23-2014, 01:12 PM | #4 |
Getting Wild
Join Date: Oct 2013
Location: Salley, SC
Posts: 131
|
Re: Key plate for TXT
Ok the switch hole is 4 3/8" by 2 7/16" and the radio hole is 7 5/8" by 2 1/2"
|
02-23-2014, 01:13 PM | #5 |
Getting Wild
Join Date: Jul 2013
Posts: 113
|
Re: Key plate for TXT
That's great, thankyou, I've just got to convert that into cm's and I'm sorted! Lol
Thanks a lot, greatly appreciated. |
02-27-2014, 10:08 AM | #6 |
Getting Wild
Join Date: Jul 2013
Posts: 113
|
Re: Key plate for TXT
all cut and fitted, looking good. thanks a lot deer hunter, great help.
|
02-27-2014, 12:41 PM | #7 |
Getting Wild
Join Date: Oct 2013
Location: Salley, SC
Posts: 131
|
Re: Key plate for TXT
|
02-27-2014, 06:30 PM | #8 |
Gone Wild
Join Date: Jan 2014
Location: FL
Posts: 294
|
Re: Key plate for TXT
How did you scrape that warning sticker out of that bottom panel? I'm trying to do that and it's just breaking to bits and not really coming off. Just thinking of putting my aluminum plate over the sticker.
|
02-28-2014, 02:09 AM | #9 |
Getting Wild
Join Date: Jul 2013
Posts: 113
|
Re: Key plate for TXT
The sticker broke up, but persisted until all off. They use wd40 on the sticky stuff with a rag to remove. Took about 20 minutes or so.
I'm thinking of plating that bit also. |
02-28-2014, 06:46 AM | #10 |
Stay thirsty my friends!
Join Date: Jan 2007
Location: Suburban Chicago
Posts: 24,283
|
Re: Key plate for TXT
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
No VIN/ID Plate | Electric Club Car | |||
Key Switch Plate | Electric EZGO | |||
Help with PDS Key Plate | Electric EZGO | |||
Where's The Id Plate | Electric Club Car | |||
Newbie:How can I identify my EZGO? No id plate plate present. Please help. | Electric EZGO |