03-01-2014, 08:48 AM | #1 |
Getting Wild
Join Date: Aug 2013
Posts: 76
|
3pg rings
I read where theres a top and bottom to the rings how can you tell as I don't want to mess this up thanks
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
03-01-2014, 10:52 AM | #2 |
Respect the Cart
Join Date: May 2010
Location: Rocky Mount, Virginia
Posts: 2,190
|
Re: 3pg rings
It is hard to see but there is a chamfer to the outside of the ring which should be installed with the beveled edge down. To make it a little easier there should be a mark on the upper side of the ring, on mine it was the letter R
Dave |
03-01-2014, 04:35 PM | #3 |
Getting Wild
Join Date: Aug 2013
Posts: 76
|
Re: 3pg rings
thanks dave I see the R on mine also so just to be clear the Ris the top side of the ring?
|
03-01-2014, 08:54 PM | #4 |
Gone Wild
Join Date: Feb 2011
Posts: 1,515
|
Re: 3pg rings
BE sure to check the ring end gap!! before installing the piston & ring assy. MAKE sure the port is facing the intake side of the cylinder. BTW WHAT UP DAVE
LOU |
03-02-2014, 07:10 AM | #5 |
Respect the Cart
Join Date: May 2010
Location: Rocky Mount, Virginia
Posts: 2,190
|
Re: 3pg rings
Vince, that is correct R is up.
Lou, how you doing man? Dave |