g-1 issues

[bish47]

tryed to do the governer mod didnt workpictures are vague to me,put the governer back on runs great on jackstands until you put a load on it, takes off good then the throttle opens up and bwaaaah.i will pull off the carb and check the main jet however i dont think its the problem,i am new so go easy on me as so i dont get emotional. iwant to remove the governer however the pics are blurry.ran great before i messed with it.nevr messed with a 2 stroke with a lawnmower carb

[86G1monster]

you can try taking the throttle cable from the pedal and attaching it straight to the carb. The way i did this is buy a 90 degree angle bracket from ace or lowes making a notch in one side to attach the cable and drilling a hole in the other side to bolt it to the carb mounting bolt on the driver side of the cart then hook the cable to carb.

[slonomo]

Originally Posted by 86G1monster

you can try taking the throttle cable from the pedal and attaching it straight to the carb. The way i did this is buy a 90 degree angle bracket from ace or lowes making a notch in one side to attach the cable and drilling a hole in the other side to bolt it to the carb mounting bolt on the driver side of the cart then hook the cable to carb.

Ditto!

[bish47]

i like a blind old man put a clean looking hose over the carb vent not seeing that it is not meant to do thus flooding out the engine,duuuuh i would like to keep it stock as it is a golf cart and not a utv