|
Electric Yamaha Electric Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
03-16-2019, 04:49 PM | #1 |
Not Yet Wild
Join Date: Mar 2019
Location: Alabama
Posts: 20
|
2013 G29, upgraded to Riot Kit - no green LED on Alltrax
New to working on carts - original Hitachi motor was stuttering and surging and low power - thought it was battery so I upgraded all 6 (48V), got even worse - pulled motor and it was very burned - decided to bite bullet and upgrade to Riot Kit - got it all installed and now no LED light on controller -
Don from Plowmans Golf Carts has been great and after him walking me through trouble shooting (even on a weekend) - we think maybe it is a bad controller (Alltrax XCT48500) -- Going to call Alltrax Monday, but I am paranoid I have something connected wrong - battery pack has 50+, Run/Tow get's 50 on one side in Tow and both sides when in run) all fuses (that I could find) check good Battery side of solenoid has 50+ all times Controller side of solenoid 50+ in run - in tow, it drops slowly B+ of controller has same as controller side of solenoid Can use ground of controller and it checks good In run, the two small lugs on Solenoid have 50+ Nothing seems to change when I put in F or R or hit accelerator Cart was running, just stuttering with bad motor when I upgraded Only two wires I removed when upgrading was I cut off the ground from battery to original controller and replaced it with a seperate new ground and sandwiched it with the ground from motor to controller and I also replaced the positive battery to solenoid with a new wire - the original wire had what I learned was a pre-charge something and supposedly not needed in new setup (I don't really understand what it was) Solenoid is not clicking, (or as Don said, this solenoid would be a loud clunk) - but from reading threads on this forum it sounds like even if it gets power, the computer would still communicate before it "clunked" Anything else I can check to make sure it is the controller and not installer head space? Tks |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
03-16-2019, 08:13 PM | #2 |
Getting Wild
Join Date: Jul 2016
Location: Bucks County, PA
Posts: 120
|
Re: 2013 G29, upgraded to Riot Kit - no green LED on Alltrax
I can't help, but I did purchase an All Trax controller that was bad from the start. They replaced it under warranty. I wasn't thrilled with their procedure. They wanted me to ship it back before they would send a new one even though they confirmed it was defective. I ended up buying a second one on my credit card so they would ship it right away and then got a credit when they received the defective one back. I pulled my hair out over a whole weekend thinking I screwed up the wiring! Good luck.
Sent from my SM-G965U using Tapatalk |
03-16-2019, 08:47 PM | #3 | |
Not Yet Wild
Join Date: Mar 2019
Location: Alabama
Posts: 20
|
Re: 2013 G29, upgraded to Riot Kit - no green LED on Alltrax
Quote:
I've gone over the wiring a hundred times trying to find my mistake - I saw some posts regarding checking the pins on the 26 pin connector - only way I can think to do that would maybe use a paperclip and then touch my lead to it, since my lead won't fit into hole Another plug for Don Plowman at Plowmans Carts - he has been right there with me (on phone) the whole time and said that if Alltrax did not send one right away, he would personally send another priority and I could send the bad one back. Highly recommend Don |
|
03-17-2019, 03:48 AM | #4 |
Gone Wild
Join Date: Jul 2018
Location: Central Ohio
Posts: 1,720
|
Re: 2013 G29, upgraded to Riot Kit - no green LED on Alltrax
Do you have a computer to plug the Alltrax into? A printer cord can be used, once you download the Alltrax toolkit.
|
03-17-2019, 07:35 AM | #5 | |
Not Yet Wild
Join Date: Mar 2019
Location: Alabama
Posts: 20
|
Re: 2013 G29, upgraded to Riot Kit - no green LED on Alltrax
Quote:
Going to store to get a printer cord after Church - have downloaded the Toolkit onto my laptop - if it comes on with the laptop, will that tell me that the controller is good? |
|
03-17-2019, 07:49 AM | #6 | |
Gone Wild
Join Date: Jul 2018
Location: Central Ohio
Posts: 1,720
|
Re: 2013 G29, upgraded to Riot Kit - no green LED on Alltrax
Quote:
If it does come up on your computer, there is a screen that will have (I forget the term they use) warning flags. That will help in diagnosing some issues. You will want the cord anyway. There might be issues that the computer will not help with in determining why it is not coming on. There is a wealth of knowledge on this forum. We'll help you get up and running. In the mean time, if you can take some pictures of your wiring and post them, that may help too. |
|
03-17-2019, 07:58 AM | #7 | |
Not Yet Wild
Join Date: Mar 2019
Location: Alabama
Posts: 20
|
Re: 2013 G29, upgraded to Riot Kit - no green LED on Alltrax
Quote:
Will post some pictures - already taken them for troubleshooting with Don, just need to get them off phone onto the laptop Also trying to find some of the post I read earlier about checking pins on the 26 pin cable - I saw something earlier about checking for pwr on certain pins and if pwr, and no light, it meant bad controller --- BUT late last night I saw something about if no "clunk" it was bad solenoid not controller - that concerned me even more |
|
03-17-2019, 08:09 AM | #8 |
Not Yet Wild
Join Date: Mar 2019
Location: Alabama
Posts: 20
|
Re: 2013 G29, upgraded to Riot Kit - no green LED on Alltrax
Pictures
|
03-17-2019, 08:13 AM | #9 |
Not Yet Wild
Join Date: Mar 2019
Location: Alabama
Posts: 20
|
Re: 2013 G29, upgraded to Riot Kit - no green LED on Alltrax
More pics
|
03-17-2019, 08:14 AM | #10 |
Gone Wild
Join Date: Jul 2018
Location: Central Ohio
Posts: 1,720
|
Re: 2013 G29, upgraded to Riot Kit - no green LED on Alltrax
http://www.buggiesgonewild.com/elect...ml#post1580511
Not sure how that link is going to show up. This is the first time I have attempted linking to a specific post in a thread. So in case it does not show what I think it will... Do not let the printer cable ends touch any wire terminations when plugged into your controller. I would assume this also goes for your computer. |
|
|
Similar Threads | ||||
Thread | Forum | |||
Alltrax SPM 48300 1 red 1 green error | Electric EZGO | |||
Alltrax SPM 48300 EZ 4 blink green | Electric EZGO | |||
Club Car DS - Upgraded GE Motor and 700 Amp Alltrax Controller | Golf Carts and Parts | |||
G16e upgraded, need help with alltrax spm | Electric Yamaha | |||
Upgraded my motor and controller on 2013 drive | Electric Yamaha |