|
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
11-29-2007, 03:01 PM | #1 |
Gone Wild
Join Date: Oct 2007
Location: Virginia
Posts: 210
|
Brush guard for an 87 Marathon
I've been unable to find any brush guards listed for anything older than an 88. Has anyone retrofitted any of these brush guards for the newer Marathons to the older models or has anyone had any luck finding brush guards made for the older models?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
11-29-2007, 03:23 PM | #2 |
Gone Wild
Join Date: Aug 2007
Location: Iowa about 15 mins from the feild of dreams
Posts: 665
|
Re: Brush guard for an 87 Marathon
i would also like to know this info.... if no one has i'm going to have one fabed up this spring for mine
|
11-29-2007, 03:31 PM | #3 |
Admin/Moderator
Join Date: Dec 2006
Location: Ohio
Posts: 18,047
|
Re: Brush guard for an 87 Marathon
Don't think you are going to find anything. I mounted this CC brush guard on this '89 ez go. Just had
to make 2 brackets. |
Ron
PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project |
|
11-29-2007, 03:34 PM | #4 |
Gone Wild
Join Date: Oct 2007
Location: Virginia
Posts: 210
|
Re: Brush guard for an 87 Marathon
|
11-29-2007, 03:36 PM | #5 |
Admin/Moderator
Join Date: Dec 2006
Location: Ohio
Posts: 18,047
|
Re: Brush guard for an 87 Marathon
I probably have better pics at home. The brackets run back to the frame.
|
Ron
PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project |
|
11-29-2007, 06:59 PM | #6 |
Gone Wild
Join Date: Nov 2007
Location: Central FL. Lake Co.
Posts: 247
|
Re: Brush guard for an 87 Marathon
New Guy ,
Thats a good lookin cart Been looking all over the net today trying to find one too for a Marathon . Being new to carts period are the CC cart brush guard the same width as a ez go. In other words did you have alter the width ? Would appreciate more pics and info on your brush guard . Thanks BCW |
11-30-2007, 07:33 AM | #7 | |
Admin/Moderator
Join Date: Dec 2006
Location: Ohio
Posts: 18,047
|
Re: Brush guard for an 87 Marathon
Quote:
guard. The width works out very well. I will post more pics and info tonight. |
|
Ron
PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project |
||
11-30-2007, 11:22 AM | #8 |
Gone Wild
Join Date: Oct 2007
Location: Virginia
Posts: 210
|
Re: Brush guard for an 87 Marathon
NewGuy, If you can, also post what year and model CC that brush guard was designed for.
|
11-30-2007, 02:40 PM | #9 |
Admin/Moderator
Join Date: Dec 2006
Location: Ohio
Posts: 18,047
|
Re: Brush guard for an 87 Marathon
|
Ron
PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project |
|
11-30-2007, 07:30 PM | #10 |
Admin/Moderator
Join Date: Dec 2006
Location: Ohio
Posts: 18,047
|
Re: Brush guard for an 87 Marathon
'89 EZ-GO, under the lower plastic bumper cover is a steel bumper.
After removing the steel bumper piece, you have the the mounting bracket tubes still in place. Here you can see how they mount to the frame of the cart. I extended the tubes forward by inserting a smaller diameter tube inside and welding the joint. Then, across the front face of the tubes, I welded ¼” thick plate large enough to move the brush guard around a bit before transferring the mounting holes. Sorry, this is the best pic I have after it was mounted. |
Ron
PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project |
|
|
|
Similar Threads | ||||
Thread | Forum | |||
EZGO RXV Brush Guard | Design Center | |||
Rocker panels and brush guard...Not a happy camper. | Gas Yamaha | |||
new brush guard | Design Center | |||
Built a brush guard | Design Center | |||
COWL GUARD | Gas Club Car |