|
|
|||||||
| Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
  |
|
|
Thread Tools | Display Modes |
02-07-2010, 02:41 PM
|
#11 |
|
Gone Wild
Join Date: Nov 2009
Location: mi
Posts: 766
|
Re: g8 clutch issue
sprid that makes a lot of sense i normally use a ratchet strap for tightening the sheath down but my ratchet on the strap was striped and i couldn't get the inner sheath in as far as i normally like it to be so i will try this and let u know
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
02-07-2010, 04:49 PM
|
#12 |
|
Admin
 Join Date: Dec 2006
Location: TN
Posts: 101,873
|
Re: g8 clutch issue
Just be careful. I know you will. Those torque springs can be dangerous. Sometimes I use two ratchet straps for safety. One above and one below the drive shaft. It's a pain getting them both off after the install though. I usually drive a wooden wedge between the sheaves after install to remove the straps.
|
|
|
|
|
|
|
|
02-07-2010, 06:12 PM
|
#13 |
|
Gone Wild
Join Date: Nov 2009
Location: mi
Posts: 766
|
Re: g8 clutch issue
sprid i took a good look at my sliding sheeve and notced there was a hair line crack in the casting on the hub im thinking this is the problem
|
|
|
|
|
02-07-2010, 06:15 PM
|
#14 |
|
Admin
Join Date: Dec 2006
Location: TN
Posts: 101,873
|
Re: g8 clutch issue
Could be. Replace it as soon as possible. That thing flys apart at high rpm and it won't be pretty.
|
|
|
|
|
|
|
|
02-07-2010, 08:09 PM
|
#15 |
|
Gone Wild
Join Date: Nov 2009
Location: mi
Posts: 766
|
Re: g8 clutch issue
ya i am going to any suggestions on a hot sheath or just go with stock
|
|
|
|
|
02-07-2010, 08:22 PM
|
#16 |
|
Admin
Join Date: Dec 2006
Location: TN
Posts: 101,873
|
Re: g8 clutch issue
Stock sheave will do. I really haven't personally ever seen much of a noticeable difference with the milled sheaves.
|
|
|
|
|
|
|
|
02-07-2010, 08:39 PM
|
#17 |
|
Gone Wild
Join Date: Nov 2009
Location: mi
Posts: 766
|
Re: g8 clutch issue
all right i appreciate your help and want to thank you for the quick responses ill keep ya posted
|
|
|
|
|
02-07-2010, 09:19 PM
|
#18 |
|
Admin
Join Date: Dec 2006
Location: TN
Posts: 101,873
|
Re: g8 clutch issue
Your welcome. We just wanna see that Yamaha up and running great!!
 |
|
|
|
|
|
|
|
02-11-2010, 07:19 PM
|
#19 |
|
Gone Wild
Join Date: Nov 2009
Location: mi
Posts: 766
|
Re: g8 clutch issue
ok i have a new sheeth with torque spring in rear along with new helix buttons and i dont under stand it but the buttuns look like they are wearing only a litle bit of the sheeth like the whole button is not making contact like it should be i ran these new buttons on an old sheeth for about 15 minutes of ride time my best guess is they wore abnormal and are not making full contact
|
|
|
|
|
02-11-2010, 07:23 PM
|
#20 |
|
Gone Wild
Join Date: Jul 2008
Location: Reddick IL
Posts: 11,220
|
Re: g8 clutch issue
Any contact is a good thing they will wear in.
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| 85 Marathon Setting for 3 Yrs / Clutch Issue | Gas EZGO | |||
| clutch on g1 issue | Gas Yamaha | |||
| 99 Carryall 2 Plus- Drive/Driven clutch issue? | Gas Club Car | |||
| ezgo clutch issue not staying on? | Gas EZGO | |||
| Clutch Issue- need help | Big Block Talk! | |||
Linear Mode
