|
|
|||||||
| Electric Club Car Electric DS, and Precedent golf cars |
  |
|
|
Thread Tools | Display Modes |
03-31-2015, 06:44 AM
|
#1 |
|
Gone Wild
Join Date: Apr 2012
Posts: 167
|
Just stopped what steps to check
Put in a new Bandit motor about 10 days ago ran great, stopped for ten minutes and would not go. it kinda did go like an inch or two at a time then not at all.
I swapped back the old motor same story, no go. No click when hitting acel, had another solenoid in running cart swapped still no go. What and how should be checked next.  this is a 2000 CC |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
03-31-2015, 02:44 PM
|
#2 |
|
Gone Wild
 Join Date: Aug 2009
Posts: 14,245
|
Re: Just stopped what steps to check
Possibly the v-glide?
|
|
|
|
|
03-31-2015, 02:53 PM
|
#3 |
|
Gone Wild
Join Date: Apr 2012
Posts: 167
|
Re: Just stopped what steps to check
ok what or how to check?
I see a micro switch in there? |
|
|
|
|
03-31-2015, 08:24 PM
|
#4 |
|
Gone Wild
Join Date: Feb 2011
Location: Chattanooga TN
Posts: 2,105
|
Re: Just stopped what steps to check
Your message is a little unclear. Do you mean that it ran good for 10 days? Or that you installed the motor 10 days ago and it ran for 10 minutes?
|
|
|
|
|
03-31-2015, 08:37 PM
|
#5 |
|
Gone Wild
Join Date: Apr 2012
Posts: 167
|
Re: Just stopped what steps to check
ran good for 10 days
|
|
|
|
|
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Steps to Take painting | Electric EZGO | |||
| paints steps | Body and Paint | |||
| rifter steps up | Announcements | |||
| small steps | Gas EZGO | |||
Linear Mode
