|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
05-19-2015, 02:30 PM | #1 |
Not Yet Wild
Join Date: May 2015
Posts: 23
|
Scottys solid state conversion... Cart does everything but move...
Did a conversion to a resistor coil 1993 DS... All installed easily, NPX controller shows everything is working well, solenoid clicks happily... Wiring appears correct, but the cart wont go in forward or reverse... Anyone have any ideas?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
05-19-2015, 02:34 PM | #2 |
Not Yet Wild
Join Date: May 2015
Posts: 23
|
Carts serial is a9421380602
|
05-19-2015, 03:29 PM | #3 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,358
|
Re: Scottys solid state conversion... Cart does everything but move...
The problem you may be having is the slightly different pin connection layout on the NPX vs the AXE.
NOTE Pins 1 and 2 should connect to throttle signal (0-5k) pin 3 = put(+)power in for 1/2 speed reverse Pin 4 = (+) power in for operation (from solenoid activation circuit)or Key switch I bet this is the problem, let us know |
05-19-2015, 03:48 PM | #4 |
Not Yet Wild
Join Date: May 2015
Posts: 23
|
Thanks for the quick reply, Scotty!
Ive currently got your NPX installed, with pin 1 as ksi, pin 2+3 the brown and black potentiometer wires, and left 4 (half speed reverse) empty. led gives one green blink (noting 0-5k programming) then solid green until WTO |
05-19-2015, 03:49 PM | #5 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,358
|
Re: Scottys solid state conversion... Cart does everything but move...
I figured you did -
Please change them to what I posted above and enjoy a ride. |
05-19-2015, 03:50 PM | #6 |
Not Yet Wild
Join Date: May 2015
Posts: 23
|
|
05-19-2015, 03:51 PM | #7 |
Not Yet Wild
Join Date: May 2015
Posts: 23
|
Blue and brown* sorry.
|
05-19-2015, 03:54 PM | #8 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,358
|
Re: Scottys solid state conversion... Cart does everything but move...
Have you got a bigger picture?
I see late model NPX was changed .... so nvrmnd moving wires. Does the led light up? |
05-19-2015, 04:02 PM | #9 |
Not Yet Wild
Join Date: May 2015
Posts: 23
|
Yes, one green blink, followed by solid green until WTO then its amber.
|
05-19-2015, 04:30 PM | #10 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,358
|
Re: Scottys solid state conversion... Cart does everything but move...
Controller is not giving any fault code. Throttle signal is matched between control and pot box. Trouble may be in the high amperage delivery system = cables, connections, F&R switch Can you post a smaller picture of the F&R switch?
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Problems during solid state conversion | Electric Club Car | |||
84 3 wheel solid state conversion | Extreme DC! | |||
G2 solid state conversion | Electric Yamaha | |||
G2 f/r on a solid state conversion | Electric Yamaha | |||
Club Car Solid state conversion kit | Golf Carts and Parts |