Scottys solid state conversion... Cart does everything but move...

Vertigo RT · 05-19-2015, 04:48 PM

Its the Hd one from Nivel... Not sure how to resize a photo on here

scottyb · 05-19-2015, 05:14 PM

Quote:

Originally Posted by Vertigo RT

Its the Hd one from Nivel... Not sure how to resize a photo on here

Resize it before you send it on your end. Can you test the throttle signal. remove the brown and blue wires from the control and plug a test lead into each wire end. Operate the pedal - you should get close to 0-5k.

Vertigo RT · 05-19-2015, 05:26 PM

Pot switch reads good.

Vertigo RT · 05-19-2015, 05:28 PM

Did that work?

Vertigo RT · 05-19-2015, 05:29 PM

Theres a chance I may have spun the A1 lug too far... Would that cause this? Still getting continuity between a1 and a2 though

Vertigo RT · 05-19-2015, 06:50 PM

Also, ive currently got the green (half speed reverse) wire from the fnr disconnected... It seems the most i get from connecting it is a pop sound from around the solenoid.

scottyb · 05-19-2015, 07:09 PM

Quote:

Originally Posted by Vertigo RT

Also, ive currently got the green (half speed reverse) wire from the fnr disconnected... It seems the most i get from connecting it is a pop sound from around the solenoid.

That's interesting, whats popping?

Vertigo RT · 05-19-2015, 07:14 PM

Seems like the post on the solenoid spark

Vertigo RT · 05-19-2015, 07:16 PM

Voltage reads 36 range... But could it need a charge?

scottyb · 05-19-2015, 07:21 PM

A spark on a post would indicate a loose or poor connection.

05-19-2015, 04:48 PM	#11
Vertigo RT Not Yet Wild Join Date: May 2015 Posts: 23	Its the Hd one from Nivel... Not sure how to resize a photo on here
Vertigo RT Not Yet Wild Join Date: May 2015 Posts: 23

05-19-2015, 05:26 PM	#13
Vertigo RT Not Yet Wild Join Date: May 2015 Posts: 23	Pot switch reads good.
Vertigo RT Not Yet Wild Join Date: May 2015 Posts: 23

05-19-2015, 05:28 PM	#14
Vertigo RT Not Yet Wild Join Date: May 2015 Posts: 23	Did that work?
Vertigo RT Not Yet Wild Join Date: May 2015 Posts: 23

05-19-2015, 05:29 PM	#15
Vertigo RT Not Yet Wild Join Date: May 2015 Posts: 23	Theres a chance I may have spun the A1 lug too far... Would that cause this? Still getting continuity between a1 and a2 though
Vertigo RT Not Yet Wild Join Date: May 2015 Posts: 23

05-19-2015, 06:50 PM	#16
Vertigo RT Not Yet Wild Join Date: May 2015 Posts: 23	Also, ive currently got the green (half speed reverse) wire from the fnr disconnected... It seems the most i get from connecting it is a pop sound from around the solenoid.
Vertigo RT Not Yet Wild Join Date: May 2015 Posts: 23

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

05-19-2015, 07:14 PM	#18
Vertigo RT Not Yet Wild Join Date: May 2015 Posts: 23	Seems like the post on the solenoid spark
Vertigo RT Not Yet Wild Join Date: May 2015 Posts: 23

05-19-2015, 07:16 PM	#19
Vertigo RT Not Yet Wild Join Date: May 2015 Posts: 23	Voltage reads 36 range... But could it need a charge?
Vertigo RT Not Yet Wild Join Date: May 2015 Posts: 23

05-19-2015, 07:21 PM	#20
scottyb Happy Carting Join Date: Dec 2007 Location: Southern California Posts: 73,419	Re: Scottys solid state conversion... Cart does everything but move... A spark on a post would indicate a loose or poor connection.

Similar Threads
Thread	Forum
Problems during solid state conversion	Electric Club Car
84 3 wheel solid state conversion	Extreme DC!
G2 solid state conversion	Electric Yamaha
G2 f/r on a solid state conversion	Electric Yamaha
Club Car Solid state conversion kit	Golf Carts and Parts