How Many Feet Of Cable For Upgrade

[Swan]

Originally Posted by klanel

Swan, the terminals on your drawing are on the same sides on each of the batteries. Is that how they physically are or was it just drawn that way for simplicity? Just wondering because I noticed on my batteries the terminals were on opposite corners.

Muddog, On my cart there isn't anything much factory left so my lengths may not be close to yours but they do match up to Swan's for his situation.

I tired to find the thread that the talk about moving batteries was going on but that was back in 07/13 and couldn't find it. but all the cables do run on the outside and mine matches the drawing

[stang99x]

Originally Posted by Muddog

Thanks, I'll order 15 feet more cable.

It takes 12.8 feet to do the battery pack including the main positive and main negative cables, I sell them all the time. It's one of the most popular sets I sell on ebay.
This includes 5 x 15' pack wires, 1 x 38 and 1 x 41 for the main terminals.

[theboss20]

5x15"...not 15'...right?

[Sergio]

Originally Posted by stang99x

It takes 12.8 feet to do the battery pack including the main positive and main negative cables, I sell them all the time. It's one of the most popular sets I sell on ebay.
This includes 5 x 15' pack wires, 1 x 38 and 1 x 41 for the main terminals.

You are missing the motor cables and FNR, but more importantly, how about the OBC?

[stang99x]

Originally Posted by theboss20

5x15"...not 15'...right?

yes, 5 times 15 inches.

And I wasn't missing anything. I said it takes 12.8 feet to do the battery pack with the main positive and negative cables. The other wires I have not made any recently thus don't have on hand to provide an exact measurement.
However if memory serves I think (THINK, not KNOW) that the others were 4 x 48 inch, 1 x 16 inch and 1 x 12 inch (it may have been 2 x 12 inch) But this is from memory from many, many months ago so I am not sure that those are exactly correct.

[Sergio]

You say You are not missing anything, but yet you only have 2 main cables.

Are You suggesting not running the main negative cable through the OBC?

[stang99x]

Originally Posted by Sergio

You say You are not missing anything, but yet you only have 2 main cables.

Are You suggesting not running the main negative cable through the OBC?

Mud if you have any further questions feel free to ask. I'm done answering the above troll.

[scottyb]

Originally Posted by stang99x

Mud if you have any further questions feel free to ask. I'm done answering the above troll.

LOL- Admin., clean up on isle 4

Keep it up kid - you'll be looking for a new place to hang out

[gornoman]

Originally Posted by stang99x

I'm done answering the above troll.

That's not nice.

[lockman1]

Forwarded an MU request!