|
11-11-2017, 02:01 PM
|
#1 |
|
Gone Wild
 Join Date: Sep 2017
Location: Slippery Rock
Posts: 243
|
Ordered clutch pullers.....
While I was contemplating taking the cheaper way out, I ordered my clutch pullers so I didn't have to come here begging for pity if it didn't turn out good. So, my question is after I pull out the main bolt on the drive clutch, do I use the 3 hole puller first to get the outside of clutch off first and then the single puller to get the rest of the clutch off? There sure isn't much room in there! My cart is already up on jack stands so I had to jack up the right rear tire to get a straight shot at the bolt. Thanks for any help or insight into what I might be getting myself into! lol
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
11-11-2017, 03:43 PM
|
#2 |
|
Gone Wild
Join Date: Mar 2015
Location: Central mn
Posts: 1,036
|
Re: Ordered clutch pullers.....
Are you talking about the primary clutch (the one on the engine)? If so you use a clutch puller that is just a bolt with a smaller solid shaft on the end.
The clutch will come off as one piece. |
|
|
|
|
11-11-2017, 04:38 PM
|
#3 |
|
Gone Wild
Join Date: Sep 2017
Location: Slippery Rock
Posts: 243
|
Re: Ordered clutch pullers.....
thank you!....so, then I guess I have the other clutch puller coming for no reason
 |
|
|
|
|
11-11-2017, 10:15 PM
|
#4 |
|
Photoshop Guy
Join Date: Aug 2012
Location: Canal Fulton, OH
Posts: 3,845
|
Re: Ordered clutch pullers.....
Yeah you don't need a three-bolt puller to remove it (that will only remove the outer sheave). As said earlier, the long clutch remover bolt is all you need and the clutch comes off in one piece.
|
|
|
|
|
11-11-2017, 10:25 PM
|
#5 |
|
Not Yet Wild
Join Date: Sep 2017
Posts: 19
|
Re: Ordered clutch pullers.....
The outer cover shouldn’t require a puller it should come off with a couple bolts......
Sent from my iPad using Tapatalk Pro |
|
|
|
|
11-12-2017, 09:45 AM
|
#6 |
|
Gone Wild
Join Date: Sep 2017
Location: Slippery Rock
Posts: 243
|
Re: Ordered clutch pullers.....
then what is the 3bolt puller for on CCP website? Is that in case you can't get the cover off the drive clutch? thanks for the replies.
|
|
|
|
|
11-12-2017, 10:09 AM
|
#7 |
|
Gone Wild
Join Date: Jun 2011
Location: Northern Indiana
Posts: 2,823
|
Re: Ordered clutch pullers.....
The 3 bolt puller is to take the cover off the outside of the drive clutch. If you are going to rebuild the clutch (arms, weights, pivot pins) that cover has to come off. Sometimes they are stubborn.
|
|
|
|
|
11-12-2017, 11:09 AM
|
#8 |
|
Gone Wild
Join Date: Sep 2017
Location: Slippery Rock
Posts: 243
|
Re: Ordered clutch pullers.....
 |
|
|
|
|
11-23-2017, 03:35 PM
|
#9 |
|
Gone Wild
Join Date: Sep 2017
Location: Slippery Rock
Posts: 243
|
Re: Ordered clutch pullers.....
Now I feel stupid cuz I can’t figure out how to use that 3 hole puller☹️
The instructions aren’t for dummies! Plate, 3 bolts,washers and nuts and the center bolt/washer and nut. Says leave 1/2 in thread showing for the 3 bolts and 3/4 for the center. But which side of plate do they go? I just don’t want to break this clutch too. Any help would be appreciated and Happy Thanksgiving to all BGW peeps! |
|
|
|
|
11-23-2017, 03:37 PM
|
#10 |
|
Gone Wild
Join Date: Sep 2017
Location: Slippery Rock
Posts: 243
|
Re: Ordered clutch pullers.....
And I’ve YouTubed for hours and for some reason nobody ever does 2001 ds repairs!
|
|
|
|
 |
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Oh! That's why we don't use cheap clutch pullers! | Gas Club Car | |||
| Ordered new secondary clutch for G2 | Gas Yamaha | |||
| Broke down and ordered the Clutch from Vegas | Clone Engine Swaps | |||
| Well I did it, ordered the new driven clutch with machining and spring ~~ | Lifted Golf Carts | |||
Linear Mode
