|
11-15-2017, 05:36 PM
|
#1 |
|
Not Yet Wild
Join Date: Sep 2007
Location: South Georgia
Posts: 55
|
Carryall 1015348 Prop Rod
Can some one with a Carryall please measure the tilt bed prop rod for me? I can't find a replacement and need to fab one. Thank you.
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
11-16-2017, 05:34 AM
|
#2 |
|
Photoshop Guy
Join Date: Aug 2012
Location: Canal Fulton, OH
Posts: 3,845
|
Re: Carryall 1015348 Prop Rod
Be careful. I'd want to confirm that the person measuring for you has the same bed length. These Carryalls came in a few different bed lengths, and I'm not sure the prop rod would be the same length between them. No personal experience myself with these rods, just a thought.
|
|
|
|
|
11-16-2017, 05:59 AM
|
#3 |
|
Not Yet Wild
Join Date: Sep 2007
Location: South Georgia
Posts: 55
|
Re: Carryall 1015348 Prop Rod
Thanks Springbok, I had not considered that. I'll look into it some more. I do know the buggy I'm picking up today is what was referred to by the owner of the buggy shop as "the long bed".
|
|
|
|
|
11-16-2017, 08:09 AM
|
#4 |
|
Gone Wild
 Join Date: Sep 2015
Location: New Braunfels, TX
Posts: 178
|
Re: Carryall 1015348 Prop Rod
|
|
|
|
|
11-16-2017, 02:56 PM
|
#5 |
|
Getting Wild
Join Date: May 2013
Location: East central Ohio
Posts: 113
|
Re: Carryall 1015348 Prop Rod
My Carryall II has a 49" overall length and the support rod measures 12 3/4" center to center on the end bends. Hope this helps.
bed lift support.JPG |
|
|
|
|
11-16-2017, 03:11 PM
|
#6 |
|
Not Yet Wild
Join Date: Sep 2007
Location: South Georgia
Posts: 55
|
Re: Carryall 1015348 Prop Rod
Thanks carguybill and texastbone. I traded for this one today and the prop rod is missing. I'm going to try and make one being I just can't bring myself to pay $60.00 plus shipping.
|
|
|
|
|
11-16-2017, 03:18 PM
|
#7 |
|
Not Yet Wild
Join Date: Sep 2007
Location: South Georgia
Posts: 55
|
Re: Carryall 1015348 Prop Rod
carguybill, does the rod appear to be close to 3/8? I'm thinking of some all thread to make one. Thank you.
|
|
|
|
|
11-16-2017, 06:07 PM
|
#8 | |
|
Getting Wild
Join Date: May 2013
Location: East central Ohio
Posts: 113
|
Re: Carryall 1015348 Prop Rod
Quote:
My recommendation is to find a local metal supply company and discuss with them your application and have them suggest a rod material for the job. My guess is that they would be able to do the two bends for you also. |
|
|
|
|
|
11-16-2017, 08:12 PM
|
#9 |
|
Gone Wild
Join Date: Sep 2015
Location: New Braunfels, TX
Posts: 178
|
Re: Carryall 1015348 Prop Rod
That's a lot of weight,
Every time i lift my bed i think about it slamming down on my head, i don't think all thread is the answer on this one. |
|
|
|
|
11-17-2017, 08:02 AM
|
#10 |
|
Getting Wild
Join Date: May 2013
Location: East central Ohio
Posts: 113
|
Re: Carryall 1015348 Prop Rod
OK, I measured it and it is, indeed, 3/8" diameter. Also, I noticed, but failed to mention before, that there is a push nut on the top end. Mine has nothing on the lower end.
|
|
|
|
 |
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| made a simple seat prop | Electric Club Car | |||
| 05 Carryall 2 | Electric Club Car | |||
| 2005 club car carryall 272 rear end swap to 04 carryall ? | Gas Club Car | |||
| 94 cc carryall 2 | Lifted Golf Carts | |||
Linear Mode
