lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric EZGO
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV.



Post New Thread  Reply
 
Thread Tools Display Modes
Old 04-14-2018, 05:11 PM   #11
scottyb
Happy Carting
 
scottyb's Avatar
E-Z-GO
 
Join Date: Dec 2007
Location: Southern California
Posts: 73,356
Default Re: Ezgo quit moving

Apparently there is a misprint. The controller output between B- and M- should go to 0v when the pedal is depressed. If the controller circuit board has power, the solenoid is closed, and the throttle signal is correct.
scottyb is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 04-14-2018, 06:15 PM   #12
razerface
Not Yet Wild
 
Join Date: Sep 2017
Location: Ohio
Posts: 64
Default Re: Ezgo quit moving

When checking the voltage on m- and b+ it is 7v before pressing pedal, 37.6 when the solinoid clicks, and increases to 38.2 as you press the pedal to floor.
razerface is offline   Reply With Quote
Old 04-14-2018, 06:19 PM   #13
razerface
Not Yet Wild
 
Join Date: Sep 2017
Location: Ohio
Posts: 64
Default Re: Ezgo quit moving

Quote:
Originally Posted by scottyb View Post
Apparently there is a misprint. The controller output between B- and M- should go to 0v when the pedal is depressed. If the controller circuit board has power, the solenoid is closed, and the throttle signal is correct.
So what should voltage be when solinoid clicks on the b- and m-

And what should the voltage be on m- and b+ in both positions?
razerface is offline   Reply With Quote
Old 04-15-2018, 10:08 AM   #14
razerface
Not Yet Wild
 
Join Date: Sep 2017
Location: Ohio
Posts: 64
Default Re: Ezgo quit moving

Since the troublshooting guide has problems and I do not know what is right or wrong on it,,here are my test results. Maybe they will tell someone how to help me.

Bat pack voltage 37.5
ITS on solenoid click .4 On full pedal 1.5
Solenoid bat post 37.5
Solenoid post controller side, no resister 37.4
Solenoid across small posts 37.5
B+ to B- solenoid click 37.5 On full pedal 37.5
B- to M- solenoid click .4 On full pedal 0.0
B+ to M- solenoid click 37 On full pedal 37.5


Any ideas?
razerface is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric EZGO


Thread Tools
Display Modes


Similar Threads
Thread Forum
99 EZGO just quit Electric EZGO
2006 36V Series quit moving 1/2 mile from home Electric EZGO
1980 Club Car quit moving Electric Club Car
94' DS quit moving while driving, resistor hot Electric Club Car
EZGO quit Electric EZGO


All times are GMT -5. The time now is 06:12 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.