Ezgo st350 Motor turning but belt slipping

Brnjennings · 12-31-2011, 03:31 PM

The motor on my Ezgo st350 2000 turns and runs fine but the belt that attaches to the rear axle just doesnt spin like it doesn't grip onto the part attached to the motor. Can some please tell me what to do to mAke the belt spin so the cart can move again?

Coltf1991 · 12-31-2011, 03:41 PM

You will probably get more hits in the "Gas Ezgo" section but we can try and help you out

Have you checked your belt deflection? Is it a centrifugal style clutch? If so there should be shims on the inside of the pulley, to allow the sheaves to move closer together and tighten up te belt. If it's anything like a 4Wheeler.

What motor do you have?

Brnjennings · 12-31-2011, 03:48 PM

I have the st350 motor it's like I think I see how it's suppose to spin or whatever but it's just sitting on a smooth metal area instead of the two plates sitting closer so it spins on them

Coltf1991 · 12-31-2011, 04:29 PM

So the cart does not go at all? Can you upload some pictures for me?

LostHusker · 12-31-2011, 06:40 PM

There are shorter belts available for your cart, it will help with take off, but can hurt the top end...start another thread in the gas section and you will get more help....maybe one of the mods can move this for you as well.

12-31-2011, 03:31 PM	#1
Brnjennings Not Yet Wild Join Date: Dec 2011 Posts: 3	Ezgo st350 Motor turning but belt slipping The motor on my Ezgo st350 2000 turns and runs fine but the belt that attaches to the rear axle just doesnt spin like it doesn't grip onto the part attached to the motor. Can some please tell me what to do to mAke the belt spin so the cart can move again?
Brnjennings Not Yet Wild Join Date: Dec 2011 Posts: 3

12-31-2011, 03:41 PM	#2
Coltf1991 Gone Wild Join Date: Jul 2011 Location: Houston, TX Posts: 2,901	Re: Ezgo st350 Motor turning but belt slipping You will probably get more hits in the "Gas Ezgo" section but we can try and help you out Have you checked your belt deflection? Is it a centrifugal style clutch? If so there should be shims on the inside of the pulley, to allow the sheaves to move closer together and tighten up te belt. If it's anything like a 4Wheeler. What motor do you have?

12-31-2011, 03:48 PM	#3
Brnjennings Not Yet Wild Join Date: Dec 2011 Posts: 3	Re: Ezgo st350 Motor turning but belt slipping I have the st350 motor it's like I think I see how it's suppose to spin or whatever but it's just sitting on a smooth metal area instead of the two plates sitting closer so it spins on them
Brnjennings Not Yet Wild Join Date: Dec 2011 Posts: 3

12-31-2011, 04:29 PM	#4
Coltf1991 Gone Wild Join Date: Jul 2011 Location: Houston, TX Posts: 2,901	Re: Ezgo st350 Motor turning but belt slipping So the cart does not go at all? Can you upload some pictures for me?

12-31-2011, 06:40 PM	#5
LostHusker Just one day at a time Join Date: Sep 2009 Location: South TX Posts: 8,650	Re: Ezgo st350 Motor turning but belt slipping There are shorter belts available for your cart, it will help with take off, but can hurt the top end...start another thread in the gas section and you will get more help....maybe one of the mods can move this for you as well.

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

Similar Threads
Thread	Forum
G22 Belt slipping	Gas Yamaha
ST350 potential issues (slipping, low top speed, bad vibes)	Gas EZGO
EZ GO workhorse 02 ST350 clutch slipping	Gas EZGO
belt slipping	Gas Yamaha
belt slipping when wet.	Gas Yamaha