|
|
|||||||
| Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
  |
|
|
Thread Tools | Display Modes |
06-23-2013, 10:29 PM
|
#1 |
|
Not Yet Wild
Join Date: Jul 2012
Location: michigan
Posts: 47
|
g1 stopped moving
ok sorry I haven't been on here a lot but I have been very busy.i have a question my g1 was running great . we went on a 3 hour ride and it didn't make any noise or nothing and it stopped moving, I thought the belt broke,but I was wrong.I don't know if the ring and pinion went out or what any ideas?
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
06-24-2013, 06:03 PM
|
#2 |
|
Gone Wild
Join Date: May 2011
Location: Las Vegas NV
Posts: 330
|
Re: g1 stopped moving
Rather unclear. What do you mean by "stop moving". Is it running but won't move? Or engine can't start?
|
|
|
|
|
06-24-2013, 09:02 PM
|
#3 |
|
Not Yet Wild
Join Date: Jul 2012
Location: michigan
Posts: 47
|
Re: g1 stopped moving
motor running and both clutches moving but rear tires aren't. sorry I didn't make it a little clearer.
|
|
|
|
|
06-24-2013, 10:51 PM
|
#4 |
|
Not Yet Wild
Join Date: Jul 2012
Location: michigan
Posts: 47
|
Re: g1 stopped moving
ok I jacked up the rear and feels like I broke a axle shaft? are there any tricks to change them?
|
|
|
|
|
06-25-2013, 07:45 PM
|
#5 |
|
Searching for The Way
 Join Date: Oct 2009
Location: Medina, Ohio (NEOHIO)
Posts: 11,441
|
Re: g1 stopped moving
Not really any tricks. I'd suggest finding a copy of a service manual if you aren't familiar with typical axle/hub setups, but it's a matter of taking off the brake drum and shoes, remove the bolts to the hub, slide out axle. The axle attaches to the rear differential with the splines, but no circlip. The hub actually holds the axle in. I'm wondering if you may have broke something in the differential? Slide both axles out and inspect. Take pics.
|
|
|
|
|
06-26-2013, 07:19 AM
|
#6 |
|
Not Yet Wild
Join Date: Jul 2012
Location: michigan
Posts: 47
|
Re: g1 stopped moving
drivers side is axle broke in half.there is a bearing retainer tack welded to axle and that is where it broke. ill try to get some pics. thanks
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| 2004 CC DS suddenly stopped moving | Electric Club Car | |||
| 1996 TXT stopped moving - motor? | Electric EZGO | |||
| 2001 EZ Go stopped moving . | Electric EZGO | |||
| Par car stopped moving | Columbia ParCar | |||
| 92 DS Stopped Moving Forward or Reverse | Electric Club Car | |||
Linear Mode
