|
|
|||||||
| Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
  |
|
|
Thread Tools | Display Modes |
08-12-2013, 09:25 PM
|
#21 |
|
Gone Wild
Join Date: Oct 2010
Posts: 6,730
|
Re: g1 refusing to turn over
From the small black wire, or to the battery ground?
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
08-12-2013, 09:27 PM
|
#22 |
|
Gone Wild
Join Date: Oct 2012
Location: Florida
Posts: 206
|
Re: g1 refusing to turn over
small black wire it searches, on the battery it reads 0
|
|
|
|
|
08-12-2013, 09:30 PM
|
#23 |
|
Gone Wild
Join Date: Oct 2012
Location: Florida
Posts: 206
|
Re: g1 refusing to turn over
ok guess i didnt touch it all the way zero on both
|
|
|
|
|
08-12-2013, 09:30 PM
|
#24 |
|
Gone Wild
Join Date: Oct 2010
Posts: 6,730
|
Re: g1 refusing to turn over
Check your positive fuse again. Check between battery ground and both sides of the fuse for 12v
|
|
|
|
|
08-12-2013, 09:33 PM
|
#25 |
|
Gone Wild
Join Date: Oct 2012
Location: Florida
Posts: 206
|
Re: g1 refusing to turn over
looks good...
|
|
|
|
|
08-12-2013, 09:35 PM
|
#26 |
|
Gone Wild
Join Date: Oct 2012
Location: Florida
Posts: 206
|
Re: g1 refusing to turn over
12.59v both sides
|
|
|
|
|
08-12-2013, 09:36 PM
|
#27 |
|
Gone Wild
Join Date: Oct 2010
Posts: 6,730
|
Re: g1 refusing to turn over
ok, sorry, I should have known the fuse was good because you said the buzzer worked.
Pull both wires off the stop switch at the pedal. Check between battery ground and both wires(not the wires on the switch). R/W should be 12v all the time. White should be 12v with pedal pressed. |
|
|
|
|
08-12-2013, 09:45 PM
|
#28 |
|
Gone Wild
Join Date: Oct 2012
Location: Florida
Posts: 206
|
Re: g1 refusing to turn over
i have 4 wires black, bk/wt, red/wt, white, and bk/wt. bk/wt is disconnected for continuous running. from battery neg post to red/wt is zero and zero to white when pressed
|
|
|
|
|
08-12-2013, 09:47 PM
|
#29 |
|
Gone Wild
Join Date: Oct 2010
Posts: 6,730
|
Re: g1 refusing to turn over
The r/w should be connected directly to the positive fuse. Look for a wire break. Are you checking the wires coming from the switch, or from the body?
|
|
|
|
|
08-12-2013, 09:51 PM
|
#30 |
|
Gone Wild
Join Date: Oct 2012
Location: Florida
Posts: 206
|
Re: g1 refusing to turn over
i checked from the neg battery post to the red/white wire were it connects at the switch by the pedal
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| G2 will not turn over | Gas Yamaha | |||
| G2 won't turn over | Gas Yamaha | |||
| Wont turn left and now wont turn right | Electric EZGO | |||
| Doesn't turn over | Gas Club Car | |||
| G16 don't turn off | Gas Yamaha | |||
Linear Mode
