|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
11-29-2013, 06:41 PM | #11 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: Anyone installed a Jet Kit on a G29
Yep, heres 2 tips...
-If you can find a short 12mm wrench, Get it. -take the lid off the airbox, that extra 1/4" space between the airbox and gas tank will be handy. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
11-29-2013, 08:42 PM | #13 |
Gone Wild
Join Date: Oct 2012
Posts: 1,733
|
Re: Anyone installed a Jet Kit on a G29
My new cart sat on the lot for a long time and i know that it didnt come with any kind of fuel treatment so as soon as don gets my clutch kit ready ill take my carb apart for a good cleaning when i install the plowmans jet and airbox upgrade.
|
11-30-2013, 04:24 PM | #14 |
Not Yet Wild
Join Date: Nov 2013
Location: Central MS
Posts: 71
|
Re: Anyone installed a Jet Kit on a G29
dbmachine,
I had to drill 5 holes in the side of the airbox, trim some plastic in the lid, and cut the throat off of the airbox. |
11-30-2013, 04:29 PM | #15 | |
Not Yet Wild
Join Date: Nov 2013
Location: Central MS
Posts: 71
|
Re: Anyone installed a Jet Kit on a G29
Quote:
You are right the engine is louder, it reminds me of my arctic cat 4 wheeler, but did you notice after instillation if you stomp on the accelerator, some hesitation? I cleaned the carb, installed the jets and adjusted the Idle screw as the instructions say to do. I actually adjusted that several different times and still have the same result, if I ease in to the throttle it does just fine, its when I put it straight to the floor I notice a little hesitation about half way in to it. |
|
11-30-2013, 08:20 PM | #16 |
Gone Wild
Join Date: Oct 2012
Posts: 1,733
|
Re: Anyone installed a Jet Kit on a G29
Well dang if the jet kit is gonna add that much noise ill just have to keep my cart stock and just mod the clutch.
|
11-30-2013, 08:22 PM | #17 |
Gone Wild
Join Date: Oct 2012
Posts: 1,733
|
Re: Anyone installed a Jet Kit on a G29
My top speed now is good just want better power down low for pulling and hauling.
|
11-30-2013, 09:29 PM | #18 |
Not Yet Wild
Join Date: Nov 2013
Location: Central MS
Posts: 71
|
Re: Anyone installed a Jet Kit on a G29
Its still a quiet machine, just the engine is a little louder, I clocked mine on my GPS at 26MPH going down hill, easily goes 25mph, and with the jet kit, it definitely does not back fire.
And actually, with larger tires, wouldn't the RPM actually go down?? The only time the RPM would increase would be from deleting the governor, and most of the time, I don't operate this thing where I can run it wide open, so any suggestions as to why the Jet kit is necessary? Its installed in mine now anyway, another $80 dollars spent, |
11-30-2013, 10:03 PM | #19 |
Gone Wild
Join Date: Oct 2012
Posts: 1,733
|
Re: Anyone installed a Jet Kit on a G29
Did you notice a great deal of power increase or was it a waste of 80$??
|
11-30-2013, 10:07 PM | #20 |
Not Yet Wild
Join Date: Nov 2013
Location: Central MS
Posts: 71
|
Re: Anyone installed a Jet Kit on a G29
It is more peppy, don't think it was a complete waste, however, the speed before and after is the same, just has more pep, louder engine, and does not backfire.
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
RXV - Radio Installed | Electric EZGO | |||
H/D installed still no go | Electric EZGO | |||
New Batterys installed | Electric Yamaha | |||
EZ GO with dump bed installed | Members Rides |