|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
03-03-2014, 10:49 PM | #1 |
Gone Wild
Join Date: Jul 2011
Posts: 389
|
81 g1
Hello, im changeing the front knuckle on my cart and the bushing, i tried to get the nut off the wheel hub and it rounded the nut head, so im buying a new knuckle, and the bushing on the tie rod is real rusted, and the other end knuckle is like real lose feeling should it be like this? Or should i replace it? And im looking for a 81 g1 diagram? I cant find any, im getting stumped on this, and im disabled , can someone give me some hints? Thanks
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
03-04-2014, 10:03 AM | #2 |
Gone Wild
Join Date: Sep 2012
Location: Missouri
Posts: 2,755
|
Re: 81 g1
Not sure what your talking about when you say knuckle. When it comes too front end parts, if they are loose I'd look at replacing them all.
With these carts being so old there is a lot can be updated and made to work better. I actually have Hiem joints and related parts that I'm going to use to make my own complete new tie rods. I know that my tie rods have some play in them and I hope that doing this will help with my bump steer. So I'd say if you have any doubt and no one close to take a look, replace the loose parts. |
03-04-2014, 10:14 AM | #3 |
Gone Wild
Join Date: Jul 2008
Location: Reddick IL
Posts: 11,220
|
Re: 81 g1
|