|
|
|||||||
| Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
  |
|
|
Thread Tools | Display Modes |
03-09-2014, 09:37 AM
|
#1 |
|
Gone Wild
Join Date: Jan 2014
Location: South Jersey
Posts: 623
|
new belt and primary ?
This g16 I picked up is pretty slow. Looked at the belt and it looks way too long and loose. It hangs so far down that it actually hits the frame before you give it gas. Also noticed I can move the primary in and out 1/2". Is it supposed to do that? I know the stock belt is 1 3/16 wide, is there a direct replacement or one from an atv thats a little wider for performance? I know plowmans has one is there any others?
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
03-09-2014, 10:01 AM
|
#2 |
|
friends call me Boke
 Join Date: Apr 2008
Location: Smithfield, North Carolina
Posts: 7,772
|
Re: new belt and primary ?
I paid $40 for my double cogged Kevlar belt off eBay for my g9. The stock size for my cart is 1 3/16's wide by 39 inches long. Find your stock size and take a look at eBay. I paid roughly a little over 1/2 price than other places for mine.
|
|
|
|
|
03-09-2014, 11:32 AM
|
#3 |
|
Gone Wild
Join Date: Jan 2014
Location: South Jersey
Posts: 623
|
Re: new belt and primary ?
Looking for ine 1 1/4" wide
|
|
|
|
|
03-09-2014, 01:55 PM
|
#4 |
|
friends call me Boke
Join Date: Apr 2008
Location: Smithfield, North Carolina
Posts: 7,772
|
Re: new belt and primary ?
Yours is the same size as mine...1 3/16" x 39"
|
|
|
|
|
03-09-2014, 08:50 PM
|
#5 |
|
Gone Wild
Join Date: Jan 2014
Location: South Jersey
Posts: 623
|
Re: new belt and primary ?
Did some searching and found the prohauler came with a 1 1/4 x 39 1/4" belt. Wouldnt that fit fine? Also found one that 39 3/4" long thats only $27. Would that work?
|
|
|
|
|
03-09-2014, 09:42 PM
|
#6 |
|
I Refuse To Get Stuck!!!
Join Date: Jun 2010
Location: Hilton,NY
Posts: 5,427
|
Re: new belt and primary ?
You don't want a longer belt,a shorter is usually done,wider will change gearing slightly,as it will ride higher up in the secondary-clutch.As far as I know,most of the older Yamis'(G16 and down,maybe some newer,and a few special models)use the same belt.
 |
|
|
|
|
03-09-2014, 09:52 PM
|
#7 |
|
Gone Wild
Join Date: Jan 2014
Location: South Jersey
Posts: 623
|
Re: new belt and primary ?
Im having a problem finding a 1 1/4x39
|
|
|
|
|
03-10-2014, 07:36 AM
|
#8 |
|
friends call me Boke
Join Date: Apr 2008
Location: Smithfield, North Carolina
Posts: 7,772
|
Re: new belt and primary ?
There all over eBay....
|
|
|
|
|
03-10-2014, 08:59 AM
|
#9 |
|
Not Yet Wild
Join Date: Feb 2014
Posts: 3
|
Re: new belt and primary ?
You may want to check with a sled shop . That where I found my belt
|
|
|
|
|
03-10-2014, 09:38 AM
|
#10 | |
|
Gone Wild
Join Date: Jan 2014
Location: South Jersey
Posts: 623
|
Re: new belt and primary ?
Quote:
|
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| primary drive or belt | Gas Columbia ParCar | |||
| Spring on Primary Clutch wearing groove in Belt | Gas Yamaha | |||
| replacing alternator/starter belt with shorter belt | Gas Club Car | |||
| How do I change the drive belt and altenator belt? | Gas Club Car | |||
| '92 carryall with new engine, belt slips even with new belt and motor set far forward | Gas Club Car | |||
Linear Mode
