|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
03-14-2014, 09:32 PM | #1 |
Getting Wild
Join Date: Feb 2013
Posts: 128
|
G-14 Secondary Spring Installed
Installed the secondary torque spring on my G-14 tonight. Replaced the shoes on the secondary plate and installed the torque spring. The torque spring did not have tails like the stock spring had, but seemed to run ok once installed. Had to scrub years of junk off all the parts.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
03-14-2014, 10:00 PM | #2 |
G8 Specialist
Join Date: Jun 2009
Location: Phoenix
Posts: 7,799
|
Re: G-14 Secondary Spring Installed
Good deal Brew! Hope it runs good!!
Did you have the body off? |
03-14-2014, 11:41 PM | #3 |
Getting Wild
Join Date: Feb 2013
Posts: 128
|
Re: G-14 Secondary Spring Installed
yes I had the body off, I am wondering if I need to rebuild the front clutch also.
|
03-15-2014, 12:42 AM | #4 |
Gone Wild
Join Date: Oct 2012
Posts: 1,733
|
Re: G-14 Secondary Spring Installed
Wouldnt hurt to check over the front clutch to make sure everything is working to peek potential.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
G16- secondary spacer / spring | Gas Yamaha | |||
secondary spring | Gas Yamaha | |||
Secondary clutch spring | Gas Yamaha | |||
09 ST secondary spring | Gas EZGO | |||
91 g2 secondary clutch spring | Gas Yamaha |