|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
03-25-2014, 03:37 PM | #1 |
Not Yet Wild
Join Date: May 2013
Posts: 9
|
g2 lift question
i have a yamaha g2 that i have installed a honda rancher motor in, it allready had a 4" lift in front but after riding first time i need something more heavy duty, so heres my question does any body have a measurement from the bootom of floorboard to ground for 7" double a arm lift with 23" tires, need to know this distance because im trying to line up height to match rear of cart
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
03-26-2014, 11:36 AM | #2 |
G8 Club Founding Member
Join Date: Sep 2010
Location: Middle of Virginia, USA
Posts: 4,265
|
Re: g2 lift question
I can't answer your question, but would love to see this build! We have a place under Big Block Swap - ATV and Bike conversions...Would love to see this G2 and the conversion!
|
03-26-2014, 04:17 PM | #3 |
I Refuse To Get Stuck!!!
Join Date: Jun 2010
Location: Hilton,NY
Posts: 5,427
|
Re: g2 lift question
Its pretty simple. If you have 4" lift and 22" tires,add 1/2" for tire difference,and 3" for the lift-difference.It will get you close enough for checking,some tires are smaller than sized,so they might end up 22" anyway.Hope this helps.
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Lift question | Lifted Golf Carts | |||
Question on Lift Kit! | Lifted Golf Carts | |||
question on lift | Gas EZGO | |||
Lift Kit Question | Electric Yamaha | |||
Lift question | Lifted Golf Carts |