|
|
|||||||
| Electric Club Car Electric DS, and Precedent golf cars |
  |
|
|
Thread Tools | Display Modes |
07-04-2016, 07:59 PM
|
#1 |
|
Not Yet Wild
Join Date: Nov 2014
Location: georgia
Posts: 41
|
maybe this was under wrong thread
2001 club car electric... s/n ac0135-058037 controller model dcx300r10 put on 22s and now brakes are dragging. took brake cable loose at connectors under body to give cable some slack but didnt help. Any other suggestions? also cart jumps when accelerated, cant stop it from hopping.. I know this has been covered before but I have a hard time finding past posts. (dummy me)
Thanks for help Jackman |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
07-04-2016, 08:19 PM
|
#2 |
|
Old Sky Soldier
 Join Date: Dec 2011
Location: Kentucky
Posts: 3,881
|
Re: maybe this was under wrong thread
Sounds like your axle turned and the self adjusters adjusted the brakes too tight. Jack cart up loosen U bolts reset axle, readjust brakes. Make sure you tighten U bolts evenly and tight.
|
|
|
|
|
07-04-2016, 09:09 PM
|
#3 |
|
Gone Wild
Join Date: Jun 2014
Location: Green Valley, Az
Posts: 678
|
Re: maybe this was under wrong thread
And use a torque wrench...an earlier post said 75ft lbs.
|
|
|
|
|
07-05-2016, 05:30 AM
|
#4 |
|
Not Yet Wild
Join Date: Nov 2014
Location: georgia
Posts: 41
|
Re: maybe this was under wrong thread
thanks guys. ill give that a shot...
|
|
|
|
|
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| did something wrong | Gas Yamaha | |||
| What Did I Do Wrong ? | Electric EZGO | |||
Linear Mode
