2014 Ezgo txt/t48 issue

yurtle · 05-08-2017, 03:32 AM

The 4 wire Molex, which activates the solenoid, and the ITS, which tells the controller how fast you want to go. If any of these four wires in the Molex has a problem, either the solenoid won't activate, or even if it does, the controller may not be getting the signal from the ITS.

I suggest reading more, and do real troubleshooting, rather than replacing random parts, which gets expensive.

Get a wiring diagram and trace all the switches in the solenoid activation circuit.

Bray6092 · 05-08-2017, 07:50 PM

Okay today cart is doing nothing. I'm
At a loss. Could it be the controller?

millersouth · 05-08-2017, 10:33 PM

Had similar problem. I could open up the pedal switch box pull off the black wire and put it back on and the cart would jerk and roll a little about 4-5 times then nothing. Ended up replacing controller been fine since. Did the cart ever run right?

Sent from my SM-G925T using Tapatalk

Bray6092 · 05-09-2017, 07:23 PM

Cart never got right. Would like to make sure it's the controller before I buy one.

scottyb · 05-09-2017, 07:34 PM

Quote:

Originally Posted by Bray6092

Cart never got right. Would like to make sure it's the controller before I buy one.

Attached is the solenoid activation circuit for the TXT48. If you have power at both ends of every red line and one F&R line then the solenoid should activate and the controller should be powered up (on) - ready to respond to a throttle command

Bray6092 · 05-09-2017, 08:03 PM

I'm thinking I don't have -48 to the solenoid. I removed the blue small
Wire and ran a jumper from
This small post to negative battery when I turn key solenoid click but cart still
Didn't move

05-08-2017, 03:32 AM	#11
yurtle Gone Mad Join Date: Oct 2009 Location: Buford, GA Posts: 8,988	Re: 2014 Ezgo txt/t48 issue The 4 wire Molex, which activates the solenoid, and the ITS, which tells the controller how fast you want to go. If any of these four wires in the Molex has a problem, either the solenoid won't activate, or even if it does, the controller may not be getting the signal from the ITS. I suggest reading more, and do real troubleshooting, rather than replacing random parts, which gets expensive. Get a wiring diagram and trace all the switches in the solenoid activation circuit.

05-08-2017, 07:50 PM	#12
Bray6092 Gone Wild Join Date: Apr 2015 Posts: 461	Re: 2014 Ezgo txt/t48 issue Okay today cart is doing nothing. I'm At a loss. Could it be the controller?
Bray6092 Gone Wild Join Date: Apr 2015 Posts: 461

05-08-2017, 10:33 PM	#13
millersouth Gone Wild Join Date: Feb 2015 Location: Myrtle Beach S.C Posts: 151	Re: 2014 Ezgo txt/t48 issue Had similar problem. I could open up the pedal switch box pull off the black wire and put it back on and the cart would jerk and roll a little about 4-5 times then nothing. Ended up replacing controller been fine since. Did the cart ever run right? Sent from my SM-G925T using Tapatalk

05-09-2017, 07:23 PM	#14
Bray6092 Gone Wild Join Date: Apr 2015 Posts: 461	Re: 2014 Ezgo txt/t48 issue Cart never got right. Would like to make sure it's the controller before I buy one.
Bray6092 Gone Wild Join Date: Apr 2015 Posts: 461

05-09-2017, 08:03 PM	#16
Bray6092 Gone Wild Join Date: Apr 2015 Posts: 461	Re: 2014 Ezgo txt/t48 issue I'm thinking I don't have -48 to the solenoid. I removed the blue small Wire and ran a jumper from This small post to negative battery when I turn key solenoid click but cart still Didn't move
Bray6092 Gone Wild Join Date: Apr 2015 Posts: 461

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

Similar Threads
Thread	Forum
2014 EZGO Express S4 governor	Gas EZGO
2014 EZGO RXV will not move	Electric EZGO
2014 Ezgo TXT	Electric EZGO
88 EZGO mod's for winter 2014	Members Rides
New cart 2014 EZGO S4	Members Rides