What to do with my setup?

[scottyb]

Ok, how to tweak that Controller so the thing stops doing wheelies?

Note I'm not going to address programming for this motor specifically. This motor requires a map and specific settings which you can acquire from D&D. Okay For the PDS with aftermarket motor.

#1 thing is to set the controller mode to turf not street.
Then reduce the throttle ramp rate from 50% to 40% (lower if needed)
And build yourself a gentle throttle curve as shown below.
These things should help quite a bit.

[mrpush]

Ok guys Great thanks for the help! I tore out all the old batteries...and I'm cleaning up a bit of rust on the carriers then onto tweaking this controller after a software install.

I have few more questions not related to this original post, should I post new topics?

[1.) I noticed some oil leaking from the differential and
2.) The suspension is really "stiff" and I'd love to be able to soften it up a bit]

Thanks,

MP

[scottyb]

1. Normal. Unless it's making a mess on the floor where you park leave it alone some seeping is normal.
2.buy a set with fewer leaves or remove a leaf.