Grinding noise

[Steve.b.of.3]

Is this noise the axle bearings. I can't seem to upload the video

[AZ.]

Originally Posted by Steve.b.of.3

Is this noise the axle bearings. I can't seem to upload the video

Or your breaks....obvious without video you're going to have to be far more explicit.

Jack up the rear, check with wheels on. Then off, and even as far as taking the rear break hob off.

[Steve.b.of.3]

I couldn't get the video to upload. but with the cart on stands I turned each wheel hearing the grinding noise. I then took off the drivers side wheel and turned the axle by the nut and could hear the noise. I seems it gets a little tighter in one spot.I hear the same noise from both sides. I know it's not the motor it's off right now getting rebuilt. I have the differential pan off and looked inside the different and everything looks good. With the pan off and turning the wheels therected is no sound coming from the different. The wheels feel tight like the bearings are good

[Steve.b.of.3]

Also does the oil in the differential travel down the tunes to the axle bearings or are just sealed