|
|
|||||||
| Electric Club Car Electric DS, and Precedent golf cars |
  |
|
|
Thread Tools | Display Modes |
12-12-2017, 10:20 AM
|
#1 |
|
Not Yet Wild
Join Date: Feb 2017
Posts: 11
|
2011 48 volt ezgo txt
Stumped. Got 2 carts got 1 running other 1 can't figure out. Solenoid was bad replaced, ITS with micro switch was replaced. Batteries at 49.48 volts. Got in hit go pedal and went but was cutting out then stopped. Solenoid is not clicking put solenoid from working cart in still no click but works in other cart. Any help would be appreciated.
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
12-12-2017, 07:20 PM
|
#2 |
|
MOD of all BS!
 Join Date: Sep 2011
Location: Florida
Posts: 17,477
|
Re: 2011 48 volt ezgo txt
Might want to repost this in the EZGO section to get more responses....
 |
|
|
|
|
12-12-2017, 08:42 PM
|
#3 |
|
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: 2011 48 volt ezgo txt
I bet a MOD will move this.
There is the solenoid activation circuit for the TXT48. You should have 48v (+) at each end of every red line when ; R/T switch in run Key on In gear Pedal down I hope this helps |
|
|
|
|
12-14-2017, 11:09 PM
|
#4 |
|
Not Yet Wild
Join Date: Feb 2017
Posts: 11
|
Re: 2011 48 volt ezgo txt
Thanks I need to figure this out I keep posting in the wrong spot thought I was in ezgo electric. Thanks for the reply. I found the problem. Plug that comes from ITS to motor controller pins were rusted and a couple broke. Cart runs great.
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| 48 volt TXT 2011 does nothing, no solenoid click | Electric EZGO | |||
| 2011 ezgo 48 volt reed switch bypass | Electric EZGO | |||
| 2011 rxv 48 volt | Electric EZGO | |||
| Green light on 2011 48 Volt EZGO | Electric EZGO | |||
| 2011 txt 48 volt wiring ?? | Electric EZGO | |||
Linear Mode
