93 marathon speed control

420ma · 03-26-2018, 07:49 PM

What controls the speed in my cart?

cgtech · 03-26-2018, 07:51 PM

Picture under the seat? I can't recall if 93 is solid state, or resistor.

420ma · 03-26-2018, 07:54 PM

I will get that as soon as i can

rib33024 · 03-26-2018, 08:13 PM

post up some pic of under the seat. Lets see whats in there. A 93 Marathon is a controller cart

420ma · 03-29-2018, 02:50 PM

PHP Code:


			
<<<@!1!@>>>[/QUOTE]

Here's a picture of under the seat. If some could point me in the direction of a wiring diagram...not sure which one I should use from the stickies. Also I replaced all the battery cables (2awg), which other cables get replaced when I upgrade the controller to 500a

rib33024 · 03-29-2018, 03:05 PM

420ma · 03-29-2018, 03:59 PM

As far as replacement of cables, is it safe to assume that anything that is a #6 now I should replace with a #2

scottyb · 03-29-2018, 04:25 PM

The controller limits the amperage flow to the motor as directed by the throttle signal device.

420ma · 03-29-2018, 06:09 PM

Ok, thanks. Am i correct in my statement about the cables

handtools · 03-29-2018, 06:25 PM

Yes, you need to replace all the high current cables.

03-26-2018, 07:49 PM	#1
420ma Gone Wild Join Date: Sep 2017 Posts: 150	93 marathon speed control What controls the speed in my cart? Last edited by 420ma; 03-26-2018 at 07:51 PM.. Reason: Title change
420ma Gone Wild Join Date: Sep 2017 Posts: 150

03-26-2018, 07:54 PM	#3
420ma Gone Wild Join Date: Sep 2017 Posts: 150	Re: 93 marathon speed control I will get that as soon as i can
420ma Gone Wild Join Date: Sep 2017 Posts: 150

03-26-2018, 08:13 PM	#4
rib33024 ...................... Join Date: Apr 2009 Location: FT Lauderdale FL. Posts: 16,416	Re: 93 marathon speed control post up some pic of under the seat. Lets see whats in there. A 93 Marathon is a controller cart

03-29-2018, 03:59 PM	#7
420ma Gone Wild Join Date: Sep 2017 Posts: 150	Re: 93 marathon speed control As far as replacement of cables, is it safe to assume that anything that is a #6 now I should replace with a #2
420ma Gone Wild Join Date: Sep 2017 Posts: 150

03-29-2018, 04:25 PM	#8
scottyb Happy Carting Join Date: Dec 2007 Location: Southern California Posts: 73,408	Re: 93 marathon speed control The controller limits the amperage flow to the motor as directed by the throttle signal device.

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

03-26-2018, 07:51 PM	#2
cgtech Over This Interview Is... Join Date: Jun 2012 Location: AZ Posts: 17,449	Re: 93 marathon Picture under the seat? I can't recall if 93 is solid state, or resistor.

03-29-2018, 03:05 PM	#6
rib33024 ...................... Join Date: Apr 2009 Location: FT Lauderdale FL. Posts: 16,416	Re: 93 marathon speed control

03-29-2018, 06:09 PM	#9
420ma Gone Wild Join Date: Sep 2017 Posts: 150	Re: 93 marathon speed control Ok, thanks. Am i correct in my statement about the cables
420ma Gone Wild Join Date: Sep 2017 Posts: 150

03-29-2018, 06:25 PM	#10
handtools Gone Wild Join Date: Nov 2011 Location: S.E. Mi. Posts: 531	Re: 93 marathon speed control Yes, you need to replace all the high current cables.

Similar Threads
Thread	Forum
marathon to txt swap exhaust question+marathon steering+snorkle	Clone Engine Swaps
88 marathon carb on 84 marathon	Gas EZGO