Controller cover & heatsink - larger controller

[jfdickson]

I’m working on upgrading the controller on my 2005 TXT cart from the stock 1206 Curtis controller to the 500A Curtis 1205-5606 controller. The 1205 is significantly larger and won’t fit under the stock controller cover. I’m also adding the new heavy duty solenoid and F&R switch as suggested. I could mount the new controller on the stock heatsink, and then cut the bottom off the stock controller cover, but it won’t cover the bottom end of the controller. Just wondering 2 things:

1. Does someone offer a replacement heatsink/cover that will fit and cover all of the upgraded solenoid and controller?
2. If no to 1, what are others doing?

[Sir Nuke]

a lot, and I mean a lot of folks, myself included, mount the new controllers on the stock heat sink, not a problem.....and what we all do, is not replace the cover at all, in most cases even the cover over the F&R....they are NOT required.

controller.jpg

[jfdickson]

Thanks!