|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
04-29-2018, 03:42 PM | #1 |
Gone Wild
Join Date: Feb 2013
Location: NC/SC
Posts: 1,012
|
2000.5 CC DS progress update
I finally got back on the DS. I found a key and switch on ebay that I really liked but the hole was not right. I made an adapter that I'm going to epoxy into the existing switch hole that makes the new switch fit nice. i then cut out for the volt meter and battery light. About 2 hours work start to finish.
fullsizeoutput_8e0.jpg fullsizeoutput_8e3.jpg fullsizeoutput_8e1.jpg fullsizeoutput_8e2.jpg fullsizeoutput_8e4.jpg |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
04-29-2018, 04:11 PM | #2 |
Just Gone
Join Date: Sep 2015
Location: North Carolina
Posts: 3,549
|
Re: 2000.5 CC DS progress update
Looks nice
|
04-29-2018, 04:28 PM | #3 |
MOD of all BS!
Join Date: Sep 2011
Location: Florida
Posts: 17,477
|
Re: 2000.5 CC DS progress update
REAL nice!
|
05-07-2018, 09:38 PM | #4 |
Gone Wild
Join Date: Feb 2013
Location: NC/SC
Posts: 1,012
|
Re: 2000.5 CC DS progress update
Got paint on the CC DS. I used the Rustoleum farm equipment paint with Valspar hardener, and thinned with acetone. This is oil based paint that is very durable. It sprayed pretty good. I kept adjusting the amount of reducer and the pressure but there was more orange peel than I wanted. It was slow to dry so I let it sit for a week and then color sanded it with 1500. It sanded well and smoothed out nice. I tested a spot with compound and was quite pleased with the shine. I'll buff it after the body is mounted to the cart. It is very slick. It's a little more work but $18.00 for 2 quarts makes the additional work worthwhile.
IMG_2924.jpg IMG_2925.jpg IMG_2926.jpg IMG_2927.jpg |
05-07-2018, 09:43 PM | #5 |
MOD of all BS!
Join Date: Sep 2011
Location: Florida
Posts: 17,477
|
Re: 2000.5 CC DS progress update
Impressive...
|
05-07-2018, 09:47 PM | #6 |
MOD of all BS!
Join Date: Sep 2011
Location: Florida
Posts: 17,477
|
Re: 2000.5 CC DS progress update
And I got 1 quart last week for a friends DS. 1qt enamel, reducer, hardener, and flex additive was $140 at the buddy/buddy rate from Single Source. I "hoped" one quart would be enough, but if you needed 2, I may have to go buy another....
|
05-07-2018, 10:10 PM | #7 |
Gone Wild
Join Date: Feb 2013
Location: NC/SC
Posts: 1,012
|
Re: 2000.5 CC DS progress update
1 quart was plenty. It is packaged 2 quarts from Home Depot for 17.88.
|
05-07-2018, 10:35 PM | #8 |
MOD of all BS!
Join Date: Sep 2011
Location: Florida
Posts: 17,477
|
Re: 2000.5 CC DS progress update
|
05-09-2018, 06:36 PM | #9 |
Gone Wild
Join Date: Feb 2013
Location: NC/SC
Posts: 1,012
|
Re: 2000.5 CC DS progress update
I never liked the way the DS nose looked, so I blacked it out below the leading edge. My LED headlight bar mounts above the bumper. The cutouts are for the DRL/turnsignals. I've wet sanded it but it hasn't been buffed. The cheap Rustoleum farm implement paint looks pretty good.
IMG_2929.jpg IMG_2930.jpg |
05-09-2018, 08:52 PM | #10 |
MOD of all BS!
Join Date: Sep 2011
Location: Florida
Posts: 17,477
|
Re: 2000.5 CC DS progress update
I like the contrast!
|
|
|
Similar Threads | ||||
Thread | Forum | |||
16 hp Briggs in Hyundia progress update. | Clone Engine Swaps | |||
99 EZGO TXT Build- Progress Update | Lifted Golf Carts | |||
G-16 in progress | Members Rides | |||
a little progress-89 gxt | Gas EZGO | |||
Ez-go work in progress update | Lifted Golf Carts |