|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
06-22-2018, 08:46 AM | #1 |
Not Yet Wild
Join Date: Dec 2017
Posts: 2
|
club car bearing retainer screws
anyone know the size of the bearing retainer screws for a 2003 club car ds 48 volt ge motor? I replaced the magnet and messed up by removing the two screws. (lesson learned) I was able to fish em out with Tahoe dawgs help. however after I tightened them in thinking all was well drove around a bit then noticed a pinging sound. put cart on lift sure enough both screws backed out. sadly gotta start all over. I like fishing just not for the bearing retainer.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
01-16-2019, 01:53 PM | #2 |
Guest
Posts: n/a
|
Re: club car bearing retainer screws
I just did the same thing; removed the screws thinking they were retaining the magnet. How did you get the 2 screws back in? You HAD to remove the motor back plate?
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Need to fish for the bearing retainer in a GE motor | Electric Club Car | |||
FREE DS C-Car golf bag retainer | Electric Club Car | |||
WANTED: club car DS t-nuts & screws for cowl | Golf Carts and Parts | |||
ezgo TXT gas exhaust valve spring retainer | Gas EZGO | |||
Need a bearing holder/retainer? | Electric EZGO |