|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
03-09-2019, 03:37 PM | #1 |
Not Yet Wild
Join Date: Jan 2019
Posts: 2
|
Alltrax XCT500 install question
I finished up my install today upgrading from 36v to 48v with the Alltrax XCT500 + 400 super solenoid. Everything seems to be working but the cart is really slow. I didn't order one of the function control devices with my initial order, but went ahead and ordered on today. I couldn't find anything in the install instructions regarding what to do with connection C4 so I left it empty. I have the stock connector from the old controller as well as the "freedom chip" that I can put in connection C4 but am unsure if I should.
Can anyone give some advise here? If C4 is supposed to be empty is there anything I should check to see what might be causing the cart to go so slow? Or could it be that it's going slow because C4 is empty? |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
03-09-2019, 03:41 PM | #2 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: Alltrax XCT500 install question
In your email :
12:40 PM (3 minutes ago) to Wade Yes, the controller is programmed to monitor motor rpms. It thinks the speed sensor has failed so it is in safe mode. Go into the program and uncheck the limit speed box on the opening page until you get a functional speed sensor installed. |
03-09-2019, 04:01 PM | #3 |
Gone Mad
Join Date: Oct 2009
Location: Buford, GA
Posts: 8,988
|
Re: Alltrax XCT500 install question
ScottyB,
It sounds like he ordered a Personality Switch, not a speed sensor? |
03-09-2019, 04:46 PM | #4 | |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: Alltrax XCT500 install question
Quote:
|
|
03-09-2019, 05:03 PM | #5 |
Not Yet Wild
Join Date: Jan 2019
Posts: 2
|
Re: Alltrax XCT500 install question
I ordered the Alltrax FNKS user control for XCT from Scotty's website.
Verified C3 is connected. C4 is empty. I did what Scotty suggested and unchecked the limit speed box and problem solved. Just got it up to 23.5 mph on stock tires. |
03-09-2019, 05:11 PM | #6 | |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: Alltrax XCT500 install question
Quote:
Thanks for your help guys - I had a little more info in my email... |
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Alltrax XCT500 Issues | Electric Club Car | |||
Alltrax XCT500 Install on 2011 Club Car DS IQ | Electric Club Car | |||
ALLTRAX XCT500 and D&D 170-502-0001 | Electric EZGO | |||
MOT-B2-V3 Field Map for Alltrax XCT500 | Electric EZGO | |||
Alltrax xct500 install help | Electric Club Car |